Export limit exceeded: 384309 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384309 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80721 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. | ||||
| CVE-2026-80690 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails. | ||||
| CVE-2026-80684 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure. | ||||
| CVE-2026-80681 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). | ||||
| CVE-2026-80675 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Reject non-exclusive metadata maps in the signed loader The loader verifies map->sha against the metadata hash in its instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is called on the frozen map. While the map is frozen, the /signed loader/ must also ensure the map is exclusive, as, without exclusivity (which a hostile host could just omit when loading the loader), another BPF program with map access can mutate the contents afterwards, so the check passes on stale data. With the extra check as part of the signed loader, it now refuses to move on with map->sha validation if the host set it up wrongly. | ||||
| CVE-2026-80666 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated--- | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80654 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly. | ||||
| CVE-2026-80653 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque. | ||||
| CVE-2026-80645 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop. | ||||
| CVE-2026-80643 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices. | ||||
| CVE-2026-80639 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/test: Fix __fortify_panic Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it is potentially overflowing the xormaps array per __counted_by(nr_maps). Quiet the false positive by initializing @nr_maps earlier. memcpy: detected buffer overflow: 32 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728 Call Trace: __fortify_panic+0xd/0xf setup_xor_mapping+0x6c/0xa0 [cxl_translate] [ dj: Fixed up @nr_entries to @nr_maps in commit log. ] | ||||
| CVE-2026-80637 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | ||||
| CVE-2026-80625 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix memory leak of bonding resources In a corner case of concurrent driver removal and driver reset, bonding resource is first released in hns_roce_hw_v2_exit() during driver removal, and then is allocated again in hns_roce_register_device() during driver reset. This leads to memory leak because the release timing has already passed. This may also lead to a kernel panic as below because of the leaked notifier callback: Call trace: 0xffffa20fccc04978 (P) raw_notifier_call_chain+0x20/0x38 call_netdevice_notifiers_info+0x60/0xb8 netdev_lower_state_changed+0x4c/0xb8 As Sashiko suggested, the teardown order of bonding resources should be inverted to make sure the resources are released when the driver is removed. | ||||
| CVE-2026-80622 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory. | ||||
| CVE-2026-80619 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference. | ||||
| CVE-2026-80617 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix foe_check_time allocation size foe_check_time is declared as u16 pointer but was allocated with only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16). When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2, it writes beyond the allocated buffer, causing heap buffer overflow and potential kernel crash. | ||||
| CVE-2026-80615 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the structure to the options_len, which is then initialized to zero. Later, we're initializing the structure by copying the tunnel info together with the options, and this triggers a warning for a potential memcpy overflow, since the compiler estimates that the options can't fit into the structure, even though the memory for them is actually allocated. memcpy: detected buffer overflow: 104 byte write of buffer size 96 WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report skb_tunnel_info_unclone+0x179/0x190 geneve_xmit+0x7fe/0xe00 The issue is triggered when built with clang and source fortification. Fix that by doing the copy in two stages: first - the main data with the options_len, then the options. This way the correct length should be known at the time of the copy. It would be better if the options_len never changed after allocation, but the allocation code is a little separate from the initialization and it would be awkward and potentially dangerous to return a struct with options_len set to a non-zero value from the metadata_dst_alloc(). Another option would be to use ip_tunnel_info_opts_set(), but it is doing too many unnecessary operations for the use case here. | ||||
| CVE-2026-80613 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: veth: fix NAPI leak in XDP enable error path During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct in the device's napi_list. When the veth device is later destroyed, the freed queue memory (which contains the leaked NAPI structure) can be reused. The subsequent device teardown iterates the NAPI list and corrupts the reallocated memory, leading to UAF. Fix this by explicitly deleting the NAPI association for the failed index 'i' before rolling back the successfully configured queues. | ||||
| CVE-2026-80605 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [jkosina@suse.com: extended hash length] | ||||