Export limit exceeded: 89334 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (89334 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90349 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx() When mac80211 leaves the link unspecified, mt7996_tx() substitutes the primary link id of the station or vif. That value is IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added, and it is then used unchecked to index vif->link_conf[], mvif->mt76.link[] and sta->link[], all of which hold IEEE80211_MLD_MAX_NUM_LINKS (15) entries. Clamp the primary link id to the default link before using it, and use the clamped value for the link_sta fallback as well. | ||||
| CVE-2026-90299 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix sleepable check for tracing/lsm prog When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog is allowed to attach to '__x64_'-alike prefix symbols. It is because the verifier does not verify whether the symbol is a kernel function or a bpf prog. That said, a sleepable tracing prog is allowed to attach to a bpf prog target whose name has '__x64_'-alike prefix. For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP prog, and copies buffer from a user pointer with bpf_copy_from_user() helper. After attaching the XDP prog to lo interface, the kernel BUG could be triggered by 'ping -c 1 -W 1 127.0.0.1': [ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324 Fix it by disallowing sleepable prog always when its target btf is not a kernel's btf. | ||||
| CVE-2026-90330 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix FF device cleanup on init failure hidpp_ff_init() creates the input force-feedback device with input_ff_create(), then allocates the HID++ FF private data, effect ID array, and workqueue. If any of those allocations fail after input_ff_create() succeeds, the function returns an error without destroying the FF device. Add an unwind path that frees the private allocations made by hidpp_ff_init() and calls input_ff_destroy() for failures after input_ff_create() succeeds. | ||||
| CVE-2026-8354 | 2026-09-19 | 6.4 Medium | ||
| The Gum Addon for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pop_tag' parameter in all versions up to, and including, 1.3.15 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-84108 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary code due to improper neutralization of input during web page generation. | ||||
| CVE-2026-84085 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary OS commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-2422 | 2026-09-19 | 6.4 Medium | ||
| The WP Composer – The Easiest Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pbwp_raw_shortcode' shortcode in all versions up to, and including, 1.0.5. This is due to the shortcode handler decoding Base64-encoded content and outputting it directly without any sanitization or escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The Base64 encoding allows the payload to bypass WordPress's KSES content filtering at save time, since the encoded string contains no harmful HTML characters. | ||||
| CVE-2026-15463 | 2026-09-19 | 6.1 Medium | ||
| The SSL Zen — SSL Certificate Installer & HTTPS Redirects plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'host' parameter in all versions up to, and including, 4.7.42 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The vulnerability is only exploitable when in the system_requirements stage. | ||||
| CVE-2026-15098 | 2026-09-19 | 6.4 Medium | ||
| The Real3D Flipbook Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'lightboxtext' shortcode attribute (and other unsanitized attributes handled by on_shortcode()) in versions up to, and including, 5.1.1. This is due to insufficient input sanitization and output escaping in the on_shortcode() and print_global_options() functions: shortcode attribute values are copied verbatim into $this->flipbook_options and then emitted via wp_json_encode() inside a <script type="application/json"> block without the JSON_HEX_TAG flag, allowing a literal </script> byte sequence in the attribute value to break out of the JSON script context. Because WordPress's shortcode_parse_atts() applies stripcslashes() to attribute values, an attacker can encode the breakout tag as \x3c/script\x3e\x3cscript\x3e…\x3c/script\x3e, which survives the wp_kses_post save-time filter applied to Contributor content (the escape bytes are safe text characters, not HTML tags) and is decoded to real angle brackets at render time. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user (typically an Editor or Administrator previewing/moderating the pending post) accesses an injected page. | ||||
| CVE-2026-90351 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: do not attach hif2 WED when the main WED attach failed If the WED attach for the primary PCIe function fails, the probe path still attached wed_hif2 for the secondary function, leaving the device in an inconsistent half-WED configuration that crashes later. The hif2 call also re-enabled hwrro_mode, which the failed primary attach had just turned off. Skip the hif2 WED setup when the primary WED device is not active. | ||||
| CVE-2026-90369 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90391 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone dmirror_fault() is called from the dmirror_read() and dmirror_write() retry loops after dmirror_do_read() or dmirror_do_write() finds a missing device page table entry. If the mirrored mm has already exited, mmget_not_zero() fails. The current code returns 0 in that case, which tells the caller that faulting succeeded even though no page was faulted and no device page table entry was installed. The caller then retries the same address, hits -ENOENT again, and can loop forever without making progress. Return -EFAULT instead, so the ioctl fails when the mirrored mm is no longer faultable. | ||||
| CVE-2026-90434 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success. | ||||
| CVE-2026-90411 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: unmap cmd_iu DMA on rsp_iu mapping failure in init_request __nvme_fc_init_request() maps cmd_iu and then rsp_iu for DMA. If the rsp_iu mapping fails, the original code only recorded the error and fell through: it left the already-mapped cmd_iu unmapped and still marked the op as FCPOP_STATE_IDLE before returning. Since blk-mq does not call .exit_request() when .init_request() fails, the cmd_iu mapping is leaked for every op whose rsp_iu mapping fails. Jump to an error path on rsp_iu mapping failure that unmaps cmd_iu and returns the error without marking the op idle, so it stays in the FCPOP_STATE_UNINIT state set by the initial memset(). | ||||
| CVE-2026-90432 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Abort directly from the hardlockup handler scx_hardlockup() defers the abort to an irq_work because exit claiming used to take scx_sched_lock and couldn't run from NMI. The deferral is now unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and drop the irq_work. This also makes the self-detected case recoverable: the perf watchdog fires on the hard-locked CPU itself, where a queued irq_work never runs with IRQs off. Also fix the return value: %true used to be returned whenever sched_ext was loaded, suppressing the kernel's hardlockup report even when the abort was refused. Return %true only when this call initiated the abort. | ||||
| CVE-2026-92486 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix CFI mismatch in task work callback BPF subprograms use the bpf_callback_t ABI, but task work invokes the callback through a three-argument function pointer. This trips kCFI. Store and invoke the callback as bpf_callback_t. | ||||
| CVE-2026-92516 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-93065 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc. | ||||