Export limit exceeded: 395619 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395619 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395619 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395619 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93040 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all() leaves the stale request behind, so even reconfiguring the channel does not recover it. issue_pending() already runs under vc.lock, but it tests configured before taking it. Move that test under the lock as well, so configured, request, and status are evaluated as one channel-state snapshot. | ||||
| CVE-2026-93079 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() sizes its output buffer from the user's fwctl_rpc.out_len, but the device is told to write cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a separate user-controlled value. Nothing bounds count against out_len, so a small out_len with a large count overflows the kvzalloc()'d buffer. A heap OOB write reachable from FWCTL_RPC. Reject requests where count exceeds the available payload room, before allocating. | ||||
| CVE-2026-93092 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unregister device notifier before IDR teardown The requested-devices notifier looks up protocol fwnodes from the active_protocols IDR. During remove, unregister the notifier before releasing and destroying active_protocols so no notifier callback can race with the IDR teardown. Keep the bus notifier registered until after the protocol state is torn down, matching the existing remove ordering for SCMI bus users. | ||||
| CVE-2026-93111 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not set ftrace_managed, it would fail to release the tracing_multi link when attaching tracing_multi link and then attaching fentry link. [ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97 ... [ 3.733170] bpf_tracing_multi_link_release+0x14/0x30 [ 3.733890] bpf_link_free+0x58/0x130 [ 3.734414] bpf_link_release+0x23/0x30 Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). | ||||
| CVE-2026-93115 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to acpi_device_hid(), which dereferences it, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the mlxbf-pmc driver and return -ENODEV when the companion is missing. | ||||
| CVE-2026-93052 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to readers. | ||||
| CVE-2026-93057 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context TX EQTR may run while devfreq gear scaling has quiesced the UFS tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr() and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct reclaim is triggered, reclaim/writeback can depend on I/O to UFS device. Because the queue is quiesced, this can cause deadlock. Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all allocations in the TX EQTR call tree, including: - params->eqtr_record in ufshcd_tx_eqtr() - eqtr_data in __ufshcd_tx_eqtr() - params in ufs_qcom_get_rx_fom() This is preferred over tagging individual call sites with GFP_NOIO, as it automatically covers any future allocations added anywhere in the call tree without requiring each caller to be aware of this constraint. [mkp: fix label as suggested by Bart] | ||||
| CVE-2026-93062 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well. | ||||
| CVE-2026-93064 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser iwl_mvm_frob_txf_key_iter() tracks the last matched byte position in loop variable 'i'. When a full key match is found (match == keylen), 'i' points at the last byte of the matched key. The memset start offset should therefore be i + 1 - keylen, not i - keylen; the current code zeroes one byte before the match and leaves the final key byte un-sanitised. | ||||
| CVE-2026-93130 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix resource leak on module load failure We need to properly clean up the SMBIOS request and the privacy driver when the module load fails. | ||||
| CVE-2026-93137 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free on mm_struct in bpf_find_vma() bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without holding a reference on the mm. On a foreign task, a concurrent exit_mm() can free the mm_struct between the lockless read and the trylock, resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU. For the current task, task->mm is stable. For a foreign task, pin the mm under task->alloc_lock and release it with mmput_async(), mirroring commit d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator"). Use spin_trylock() instead of get_task_mm() so BPF context does not block on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the foreign-task path because dropping the mm reference is not safe there. Race: CPU0 (BPF program) CPU1 (exiting task) ============================ ========================== bpf_find_vma(foreign_task): mm = task->mm exit_mm(): task->mm = NULL mmput(mm) -> frees mm_struct mmap_read_trylock(mm) // UAF on mm | ||||
| CVE-2026-93142 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/rcar: Fix error checking in probe() This code accidentally calls thermal_zone_device_enable() before checking whether thermal_zone_device_register_with_trips() failed. Move the call until later to avoid an error pointer dereference of "priv->zone". The driver works differently depending on if we are using OF thermal or not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and call thermal_zone_device_enable() if not. We can share same error check for if either of these fail. Moving the thermal_zone_device_enable() call is a bit cleaner as well. The original code used a three step process to cleanup: 1. Call thermal_zone_device_unregister() to cleanup. 2. Set priv->zone to an error pointer to preserve the error code. 3. Set priv->zone to NULL to avoid a second call to thermal_zone_device_unregister() in the rcar_thermal_remove() function. Now we can just do a direct goto error_unregister and rcar_thermal_remove() handles the cleanup properly. | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-93151 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blktests nvme/061 with the rdma transport and the siw driver. Kernel kmemleak feature reports them as follows: unreferenced object 0xffff88812bc490c0 (size 32): comm "kworker/2:1H", pid 409, jiffies 4307744490 backtrace (crc 89afd339): __kmalloc_noprof+0x5f9/0x890 sgl_alloc_order+0x7b/0x380 nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet] nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 unreferenced object 0xffff88814bd05e80 (size 64): comm "kworker/3:1H", pid 148, jiffies 4295195428 backtrace (crc e35510cb): __kmalloc_noprof+0x5f9/0x890 rdma_rw_ctx_init+0x333/0x1fa0 [ib_core] nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 To avoid the memory leaks, reclaim the memory of the in-flight responses when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources() that frees up the RDMA read/write context and the request SGLs of such responses. | ||||
| CVE-2026-93155 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Fix AEAD unregister count in error path register_aes_algs() registers the AEAD algorithms before registering the skcipher algorithms. If skcipher registration fails, the function unwinds the earlier AEAD registration with crypto_engine_unregister_aeads(), but it passes ARRAY_SIZE(algs), which is the skcipher table size. Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper iterates over the same table that was registered. Also clarify the nearby comment: the crypto registration helpers clean up algorithms registered within the same call, while this function must still unwind earlier successful registration steps. | ||||
| CVE-2026-93187 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of input or output formats is zero, sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc() print an error and jump to the cleanup label. At that point 'ret' is still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so the function returns success and the caller never finds out that the widget setup actually failed. Set ret to -EINVAL before the goto so the error gets reported. | ||||
| CVE-2026-93191 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix incorrect task context in smack_msg_queue_msgrcv The smack_msg_queue_msgrcv() function incorrectly checks the permissions of the 'current' task instead of the 'target' task. In the msgsnd() syscall path, if a receiver is already waiting, the pipelined_send() optimization is used to push the message directly to the receiver task: ipc/msg.c`pipelined_send(): ` smp_store_release(&msr->r_msg, msg) In this case, the 'sender' (current) task performs the check on behalf of the 'receiver' task (msr->r_tsk, passed as the 'target' parameter): ipc/msg.c`pipelined_send(): ` security_msg_queue_msgrcv(,, target := msr->r_tsk,,) However, smack_msg_queue_msgrcv() ignores the 'target' and checks 'current': smack_msg_queue_msgrcv(…) ` smk_curacc_msq(isp, MAY_READWRITE); // current task 'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement, but 'target' (the receiver task) might NOT; as a result, an unauthorized receiver gets the message, violating MAC policy. Test: 1) create a sysv message queue with label “foo” 2) echo "bar foo r" >/smack/load2 3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled task. The task is waiting for the messages ... 4) msgsnd() from a "foo"-labeled task: "bar"-labeled task gets the message. This patch fixes the issue by checking permission on the 'target' task instead of 'current'. (2008-02-04, Casey Schaufler) | ||||
| CVE-2026-93192 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming job to queue->active_job before calling v3d_fence_create(). If v3d_fence_create() fails, the callback returns NULL without clearing active_job, leaving a dangling pointer. Create a failure path in all run_job() callbacks that clears the active job before returning NULL. The BIN path takes queue->queue_lock around the clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD paths have no concurrent reader, so the clear is lock-free. | ||||
| CVE-2026-90981 | 2 Satollo, Wordpress | 2 Newsletter – Send Awesome Emails From Wordpress, Wordpress | 2026-09-19 | 6.1 Medium |
| The Newsletter – Send awesome emails from WordPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'nn' parameter in all versions up to, and including, 9.3.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Successful exploitation requires the victim to be a logged-in administrator, as the antibot check auto-passes for authenticated users, routing the unsanitized payload through the administrator-visible output branch of dienow(). | ||||
| CVE-2026-90884 | 2 Brechtvds, Wordpress | 2 Wp Recipe Maker, Wordpress | 2026-09-19 | 5.4 Medium |
| The WP Recipe Maker plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'notes' parameter in all versions up to, and including, 10.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||