Export limit exceeded: 409415 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409415 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409415 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409415 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-57875 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: RCU protect disk->conv_zones_bitmap Ensure that a disk revalidation changing the conventional zones bitmap of a disk does not cause invalid memory references when using the disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap pointer. disk_zone_is_conv() is modified to operate under the RCU read lock and the function disk_set_conv_zones_bitmap() is added to update a disk conv_zones_bitmap pointer using rcu_replace_pointer() with the disk zone_wplugs_lock spinlock held. disk_free_zone_resources() is modified to call disk_update_zone_resources() with a NULL bitmap pointer to free the disk conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in disk_update_zone_resources() to set the new (revalidated) bitmap and free the old one. | ||||
| CVE-2024-57849 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/cpum_sf: Handle CPU hotplug remove during sampling CPU hotplug remove handling triggers the following function call sequence: CPUHP_AP_PERF_S390_SF_ONLINE --> s390_pmu_sf_offline_cpu() ... CPUHP_AP_PERF_ONLINE --> perf_event_exit_cpu() The s390 CPUMF sampling CPU hotplug handler invokes: s390_pmu_sf_offline_cpu() +--> cpusf_pmu_setup() +--> setup_pmc_cpu() +--> deallocate_buffers() This function de-allocates all sampling data buffers (SDBs) allocated for that CPU at event initialization. It also clears the PMU_F_RESERVED bit. The CPU is gone and can not be sampled. With the event still being active on the removed CPU, the CPU event hotplug support in kernel performance subsystem triggers the following function calls on the removed CPU: perf_event_exit_cpu() +--> perf_event_exit_cpu_context() +--> __perf_event_exit_context() +--> __perf_remove_from_context() +--> event_sched_out() +--> cpumsf_pmu_del() +--> cpumsf_pmu_stop() +--> hw_perf_event_update() to stop and remove the event. During removal of the event, the sampling device driver tries to read out the remaining samples from the sample data buffers (SDBs). But they have already been freed (and may have been re-assigned). This may lead to a use after free situation in which case the samples are most likely invalid. In the best case the memory has not been reassigned and still contains valid data. Remedy this situation and check if the CPU is still in reserved state (bit PMU_F_RESERVED set). In this case the SDBs have not been released an contain valid data. This is always the case when the event is removed (and no CPU hotplug off occured). If the PMU_F_RESERVED bit is not set, the SDB buffers are gone. | ||||
| CVE-2024-57804 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. | ||||
| CVE-2024-57791 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check return value of sock_recvmsg when draining clc data When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen. This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining. | ||||
| CVE-2024-56664 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix race between element replace and close() Element replace (with a socket different from the one stored) may race with socket's close() link popping & unlinking. __sock_map_delete() unconditionally unrefs the (wrong) element: // set map[0] = s0 map_update_elem(map, 0, s0) // drop fd of s0 close(s0) sock_map_close() lock_sock(sk) (s0!) sock_map_remove_links(sk) link = sk_psock_link_pop() sock_map_unlink(sk, link) sock_map_delete_from_link // replace map[0] with s1 map_update_elem(map, 0, s1) sock_map_update_elem (s1!) lock_sock(sk) sock_map_update_common psock = sk_psock(sk) spin_lock(&stab->lock) osk = stab->sks[idx] sock_map_add_link(..., &stab->sks[idx]) sock_map_unref(osk, &stab->sks[idx]) psock = sk_psock(osk) sk_psock_put(sk, psock) if (refcount_dec_and_test(&psock)) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) unlock_sock(sk) __sock_map_delete spin_lock(&stab->lock) sk = *psk // s1 replaced s0; sk == s1 if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch sk = xchg(psk, NULL) if (sk) sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle psock = sk_psock(sk) sk_psock_put(sk, psock) if (refcount_dec_and_test()) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) release_sock(sk) Then close(map) enqueues bpf_map_free_deferred, which finally calls sock_map_free(). This results in some refcount_t warnings along with a KASAN splat [1]. Fix __sock_map_delete(), do not allow sock_map_unref() on elements that may have been replaced. [1]: BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330 Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063 CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Workqueue: events_unbound bpf_map_free_deferred Call Trace: <TASK> dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 kasan_check_range+0x10f/0x1e0 sock_map_free+0x10e/0x330 bpf_map_free_deferred+0x173/0x320 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1202: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 unix_create1+0x88/0x8a0 unix_create+0xc5/0x180 __sock_create+0x241/0x650 __sys_socketpair+0x1ce/0x420 __x64_sys_socketpair+0x92/0x100 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 46: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590 __sk_destruct+0x388/0x5a0 sk_psock_destroy+0x73e/0xa50 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 The bu ---truncated--- | ||||
| CVE-2024-56637 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Hold module reference while requesting a module User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call. | ||||
| CVE-2024-56624 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix out_fput in iommufd_fault_alloc() As fput() calls the file->f_op->release op, where fault obj and ictx are getting released, there is no need to release these two after fput() one more time, which would result in imbalanced refcounts: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230 Call trace: refcount_warn_saturate+0x60/0x230 (P) refcount_warn_saturate+0x60/0x230 (L) iommufd_fault_fops_release+0x9c/0xe0 [iommufd] ... VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd]) WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0 Call trace: filp_flush+0x3c/0xf0 (P) filp_flush+0x3c/0xf0 (L) __arm64_sys_close+0x34/0x98 ... imbalanced put on file reference count WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138 Call trace: __file_ref_put+0x100/0x138 (P) __file_ref_put+0x100/0x138 (L) __fput_sync+0x4c/0xd0 Drop those two lines to fix the warnings above. | ||||
| CVE-2024-56549 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix NULL pointer dereference in object->file At present, the object->file has the NULL pointer dereference problem in ondemand-mode. The root cause is that the allocated fd and object->file lifetime are inconsistent, and the user-space invocation to anon_fd uses object->file. Following is the process that triggers the issue: [write fd] [umount] cachefiles_ondemand_fd_write_iter fscache_cookie_state_machine cachefiles_withdraw_cookie if (!file) return -ENOBUFS cachefiles_clean_up_object cachefiles_unmark_inode_in_use fput(object->file) object->file = NULL // file NULL pointer dereference! __cachefiles_write(..., file, ...) Fix this issue by add an additional reference count to the object->file before write/llseek, and decrement after it finished. | ||||
| CVE-2024-53167 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfs/blocklayout: Don't attempt unregister for invalid block device Since commit d869da91cccb ("nfs/blocklayout: Fix premature PR key unregistration") an unmount of a pNFS SCSI layout-enabled NFS may dereference a NULL block_device in: bl_unregister_scsi+0x16/0xe0 [blocklayoutdriver] bl_free_device+0x70/0x80 [blocklayoutdriver] bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver] nfs4_put_deviceid_node+0x60/0xc0 [nfsv4] nfs4_deviceid_purge_client+0x132/0x190 [nfsv4] unset_pnfs_layoutdriver+0x59/0x60 [nfsv4] nfs4_destroy_server+0x36/0x70 [nfsv4] nfs_free_server+0x23/0xe0 [nfs] deactivate_locked_super+0x30/0xb0 cleanup_mnt+0xba/0x150 task_work_run+0x59/0x90 syscall_exit_to_user_mode+0x217/0x220 do_syscall_64+0x8e/0x160 This happens because even though we were able to create the nfs4_deviceid_node, the lookup for the device was unable to attach the block device to the pnfs_block_dev. If we never found a block device to register, we can avoid this case with the PNFS_BDEV_REGISTERED flag. Move the deref behind the test for the flag. | ||||
| CVE-2024-53138 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")). | ||||
| CVE-2024-53135 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are myriad bugs in the implementation, some of which are fatal to the guest, and others which put the stability and health of the host at risk. For guest fatalities, the most glaring issue is that KVM fails to ensure tracing is disabled, and *stays* disabled prior to VM-Enter, which is necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing is enabled (enforced via a VMX consistency check). Per the SDM: If the logical processor is operating with Intel PT enabled (if IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load IA32_RTIT_CTL" VM-entry control must be 0. On the host side, KVM doesn't validate the guest CPUID configuration provided by userspace, and even worse, uses the guest configuration to decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring guest CPUID to enumerate more address ranges than are supported in hardware will result in KVM trying to passthrough, save, and load non-existent MSRs, which generates a variety of WARNs, ToPA ERRORs in the host, a potential deadlock, etc. | ||||
| CVE-2024-53125 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: sync_linked_regs() must preserve subreg_def Range propagation must not affect subreg_def marks, otherwise the following example is rewritten by verifier incorrectly when BPF_F_TEST_RND_HI32 flag is set: 0: call bpf_ktime_get_ns call bpf_ktime_get_ns 1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff 2: w1 = w0 rewrites w1 = w0 3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r) 4: r1 >>= 32 r11 <<= 32 (r) 5: r0 = r1 r1 |= r11 (r) 6: exit; if w0 < 0xa goto pc+0 r1 >>= 32 r0 = r1 exit (or zero extension of w1 at (2) is missing for architectures that require zero extension for upper register half). The following happens w/o this patch: - r0 is marked as not a subreg at (0); - w1 is marked as subreg at (2); - w1 subreg_def is overridden at (3) by copy_register_state(); - w1 is read at (5) but mark_insn_zext() does not mark (2) for zero extension, because w1 subreg_def is not set; - because of BPF_F_TEST_RND_HI32 flag verifier inserts random value for hi32 bits of (2) (marked (r)); - this random value is read at (5). | ||||
| CVE-2024-50275 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | ||||
| CVE-2024-50082 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). | ||||
| CVE-2023-7324 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Sanitize possible addl_desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). | ||||
| CVE-2023-54318 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 | ||||
| CVE-2023-54317 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm flakey: don't corrupt the zero page When we need to zero some range on a block device, the function __blkdev_issue_zero_pages submits a write bio with the bio vector pointing to the zero page. If we use dm-flakey with corrupt bio writes option, it will corrupt the content of the zero page which results in crashes of various userspace programs. Glibc assumes that memory returned by mmap is zeroed and it uses it for calloc implementation; if the newly mapped memory is not zeroed, calloc will return non-zeroed memory. Fix this bug by testing if the page is equal to ZERO_PAGE(0) and avoiding the corruption in this case. | ||||
| CVE-2023-54308 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Create card with device-managed snd_devm_card_new() snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> | ||||
| CVE-2023-54306 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: avoid hanging tasks on the tx_lock syzbot sent a hung task report and Eric explains that adversarial receiver may keep RWIN at 0 for a long time, so we are not guaranteed to make forward progress. Thread which took tx_lock and went to sleep may not release tx_lock for hours. Use interruptible sleep where possible and reschedule the work if it can't take the lock. Testing: existing selftest passes | ||||
| CVE-2023-54292 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP request done KCSAN detects a data race on cqp_request->request_done memory location which is accessed locklessly in irdma_handle_cqp_op while being updated in irdma_cqp_ce_handler. Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any compiler optimizations like load fusing and/or KCSAN warning. [222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma] [222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5: [222808.417610] irdma_cqp_ce_handler+0x21e/0x270 [irdma] [222808.417725] cqp_compl_worker+0x1b/0x20 [irdma] [222808.417827] process_one_work+0x4d1/0xa40 [222808.417835] worker_thread+0x319/0x700 [222808.417842] kthread+0x180/0x1b0 [222808.417852] ret_from_fork+0x22/0x30 [222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1: [222808.417995] irdma_wait_event+0x1e2/0x2c0 [irdma] [222808.418099] irdma_handle_cqp_op+0xae/0x170 [irdma] [222808.418202] irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma] [222808.418308] irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma] [222808.418411] irdma_rt_deinit_hw+0x179/0x1d0 [irdma] [222808.418514] irdma_ib_dealloc_device+0x11/0x40 [irdma] [222808.418618] ib_dealloc_device+0x2a/0x120 [ib_core] [222808.418823] __ib_unregister_device+0xde/0x100 [ib_core] [222808.418981] ib_unregister_device+0x22/0x40 [ib_core] [222808.419142] irdma_ib_unregister_device+0x70/0x90 [irdma] [222808.419248] i40iw_close+0x6f/0xc0 [irdma] [222808.419352] i40e_client_device_unregister+0x14a/0x180 [i40e] [222808.419450] i40iw_remove+0x21/0x30 [irdma] [222808.419554] auxiliary_bus_remove+0x31/0x50 [222808.419563] device_remove+0x69/0xb0 [222808.419572] device_release_driver_internal+0x293/0x360 [222808.419582] driver_detach+0x7c/0xf0 [222808.419592] bus_remove_driver+0x8c/0x150 [222808.419600] driver_unregister+0x45/0x70 [222808.419610] auxiliary_driver_unregister+0x16/0x30 [222808.419618] irdma_exit_module+0x18/0x1e [irdma] [222808.419733] __do_sys_delete_module.constprop.0+0x1e2/0x310 [222808.419745] __x64_sys_delete_module+0x1b/0x30 [222808.419755] do_syscall_64+0x39/0x90 [222808.419763] entry_SYSCALL_64_after_hwframe+0x63/0xcd [222808.419829] value changed: 0x01 -> 0x03 | ||||