Export limit exceeded: 417722 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417722 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 54205 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54205 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-64015 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: security/keys: fix missed RCU read section on lookup Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. | ||||
| CVE-2026-64006 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ] | ||||
| CVE-2026-63940 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0. | ||||
| CVE-2026-63855 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec rings VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit efc9dd5590894109bce9a0bfe1fa5592dd6b20b1) | ||||
| CVE-2026-63854 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) | ||||
| CVE-2026-63853 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2026-53376 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add upper bound check for num_of_nodes drm/amdkfd: Add upper bound check for num_of_nodes in kfd_ioctl_get_process_apertures_new. (cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) | ||||
| CVE-2026-53330 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) | ||||
| CVE-2026-53317 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Place upper limit on station AID Any station configured with an AID over 20 causes a firmware crash. This situation occurred in our testing using an AP interface on 7922 hardware, with a modified hostapd, sourced from Mediatek's OpenWRT feeds. In stock hostapd, station AIDs begin counting at 1, and this configuration is prevented with an upper limit on associated stations. However, the modified hostapd began allocation at 65, which caused the firmware to crash. This fix does not allow these AIDs to work, but will prevent the firmware crash. This crash was only seen on IFTYPE_AP interfaces, and the fix does not appear to have an effect on IFTYPE_STATION behavior. | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||
| CVE-2026-53230 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. | ||||
| CVE-2026-53224 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. | ||||
| CVE-2026-53076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8. | ||||
| CVE-2026-53027 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! | ||||
| CVE-2026-53015 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com | ||||