Export limit exceeded: 384591 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384591 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80723 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior. | ||||
| CVE-2026-16259 | 2026-08-29 | N/A | ||
| The Uix UserCenter WordPress plugin through 1.0.3 does not verify that the account being modified through an unauthenticated profile-update action belongs to the requester, and it authenticates that action with a token whose signing key is hardcoded and identical across every install, allowing unauthenticated attackers to forge a token for any user, overwrite an administrator's email and password, and take over the account. | ||||
| CVE-2026-80635 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from short trigger BA firmware response The firmware response length is only checked against sizeof(*rsp) (20 bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read at buf + 20 without verifying the response contains it. This causes an out-of-bounds read of stale heap data, corrupting the BA session state. Add validation that the response includes the candidate data. | ||||
| CVE-2026-80638 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent [BUG] Unlinking a refcounted file whose refcount tree has leaf blocks triggers a fortify panic due to an out-of-bounds write. [CAUSE] When the last leaf block is removed from a refcount tree, ocfs2_remove_refcount_extent() converts the root back to leaf mode with a bulk memset on &rb->rf_records. rf_records sits in an anonymous union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count, and is 0 for a single-level tree. With rl_count equal to 0, the memset writes past the 16-byte declared size of rf_records, which the fortify checker catches. [FIX] Replace the bulk memset on &rb->rf_records with a correctly-bounded memset on rl_recs[] alone, after setting rl_count to the correct value. | ||||
| CVE-2026-80645 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop. | ||||
| CVE-2026-80649 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does. | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80670 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the accessor's internal check and returning CPU 0's topology. | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80691 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE In the iblock_execute_pr_out() function, PRO_PREEMPT, PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability checks through ops->pr_clear. The error check allows unimplemented hooks to pass through the gate, resulting dereferencing a NULL function pointer. Check whether the hooks that need to be called are supported. | ||||
| CVE-2026-80694 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. | ||||
| CVE-2026-80718 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() In pcpu_create_chunk(), nr_pages is the total contiguous backing allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated() uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap. Since bit N in chunk->populated means page offset N inside every unit is backed. When nr_units > 1, the function writes beyond chunk->populated. Fix it by using chunk->nr_pages. It also fixes the global pcpu_nr_empty_pop_pages accounting, since pcpu_balance_free() only iterates up to chunk->nr_pages. Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") introduced the bitmap overflow issue. Later, commit b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the accounting issue. | ||||
| CVE-2026-80619 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference. | ||||
| CVE-2026-76547 | 2026-08-29 | N/A | ||
| The User Profile Builder WordPress plugin before 4.0.1 does not validate the type of data being deserialized when importing a configuration file, allowing high privilege users such as administrators to conduct PHP Object Injection. The affected feature is a free add-on which is disabled by default, and no POP chain is present in the User Profile Builder WordPress plugin before 4.0.1 itself, so further impact requires a suitable gadget from another installed User Profile Builder WordPress plugin before 4.0.1 or . | ||||
| CVE-2026-80603 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly. | ||||
| CVE-2026-80663 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tools/power/x86/intel-speed-select: Harden daemon pidfile open Avoid symlink-based pidfile clobbering by opening the pidfile with O_NOFOLLOW and validating it with fstat() before locking/writing. The daemon currently uses a fixed pidfile path under /tmp. A local unprivileged user can pre-create a symlink at that path and cause a root-run daemon instance to write into an attacker-chosen file. | ||||
| CVE-2026-80591 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result. | ||||
| CVE-2026-80593 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package.count check first. Add the same check to atk_ec_present() so a malformed firmware package cannot trigger an out-of-bounds read. | ||||
| CVE-2026-80599 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access. | ||||
| CVE-2026-80600 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||