Export limit exceeded: 22721 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22721 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-54211 | 1 Tobit Laboratories Ag | 1 Teamdavid | 2026-09-07 | N/A |
| Tobit Laboratories AG TeamDavid's Webbox application’s endpoint “//serverClient_close.html” is vulnerable to a buffer overflow vulnerability in multiple form data parameters. By submitting excessively long values in these parameters, an authenticated attacker can trigger a server crash, resulting in denial of service. Depending on the stack state or if a stack canary can be disclosed through another vulnerability, this buffer overflow could potentially be exploited for remote code execution, leading to full compromise of the server. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | ||||
| CVE-2026-54210 | 1 Tobit Laboratories Ag | 1 Teamdavid | 2026-09-07 | N/A |
| Tobit Laboratories AG TeamDavid's Webbox application implements various file upload functionalities that are vulnerable to a buffer overflow condition. By specifying an excessively long filename in a file upload request, an unauthenticated attacker can trigger a crash of the server, resulting in a denial of service. Depending on the stack state or if a stack canary can be disclosed through another vulnerability, this buffer overflow could potentially be exploited for remote code execution, leading to full compromise of the server. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | ||||
| CVE-2026-33816 | 1 Jackc | 1 Pgx | 2026-09-07 | 9.8 Critical |
| Memory-safety vulnerability in github.com/jackc/pgx/v5. | ||||
| CVE-2026-85660 | 1 Mladensu | 1 Cli-mcp-server | 2026-09-07 | 8.1 High |
| cli-mcp-server 0.2.5 contains a command allowlist bypass vulnerability in the _validate_command_with_operators function when ALLOW_SHELL_OPERATORS is enabled. Attackers can use shell command substitution syntax like $(...) or backticks to execute non-allowlisted commands that bypass the ALLOWED_COMMANDS validation check. | ||||
| CVE-2026-85672 | 1 Getomni-ai | 1 Zerox | 2026-09-07 | 9.8 Critical |
| zerox 1.1.20 contains an OS command injection vulnerability in the file download mechanism where the temporary file extension derived from document URLs is interpolated unsanitized into shell commands executed by poppler utilities. Attackers can craft document URLs with malicious file extensions containing command substitution syntax to execute arbitrary OS commands before document processing occurs. | ||||
| CVE-2026-78327 | 1 Sonicwall | 1 Network Security Manager | 2026-09-07 | 9.1 Critical |
| An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the SonicWall Network Security Manager (NSM) On-Prem Management interface allows an authenticated attacker with SuperAdmin privileges to inject arbitrary commands that are executed on the underlying host, resulting in remote code execution. | ||||
| CVE-2026-80117 | 1 Passmark | 3 Burnintest, Osforensics, Performancetest | 2026-09-07 | 7.1 High |
| PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation vulnerability in DirectIo64.sys that allows local users to issue arbitrary IN and OUT instructions to any x86 I/O port due to missing allowlist or port validation on exposed IOCTLs. Attackers can obtain a device handle and write to sensitive ports including the PS/2 controller port, CPU reset ports, CMOS configuration ports, and interrupt controller ports to cause an immediate system reset or other hardware-level manipulation from a standard user account. | ||||
| CVE-2026-2670 | 1 Advantech | 14 Wise-6610, Wise-6610-cb, Wise-6610-eb and 11 more | 2026-09-07 | 7.2 High |
| A vulnerability was identified in Advantech WISE-6610-NB, WISE-6610-EB, WISE-6610-TB, WISE-6610-JB, WISE-6610-CB, WISE-6610-EL-NB, WISE-6610-EL-EB, WISE-6610-EL-TB, WISE-6610-EL-JB, WISE-6610-EL-CB, WISE-6610P-DEA, WISE-6610P-DNA and WISE-6610P-DTA 1.2.1_20251110. Affected is an unknown function of the file /cgi-bin/luci/admin/openvpn_apply of the component Background Management. Such manipulation of the argument delete_file leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. Upgrading to version 1.2.4_20260821 is able to address this issue. It is advisable to upgrade the affected component. The vendor explains: "The delete operation has been redesigned to map the requested file type to a fixed allowlisted path, require a numeric tunnel ID, reject invalid requests, and use the native filesystem API (fs.unlink) instead of constructing a shell command from request data." | ||||
| CVE-2026-86149 | 1 Tenda | 2 Cp3, Cp3 Firmware | 2026-09-05 | 9.1 Critical |
| A weakness has been identified in Tenda CP3 27.5.57.101. This issue affects some unknown processing of the file Net/NetCheckPing.cpp. This manipulation of the argument interface_name/host causes os command injection. The attack can be initiated remotely. | ||||
| CVE-2026-85439 | 1 Moos-ivp | 1 Moos-ivp | 2026-09-05 | 7.8 High |
| MOOS-IvP through 24.8.1 contains a remote code execution vulnerability in alogsplit's SplitHandler::handlePreCheckSplitDir() function that fails to sanitize shell metacharacters in log file pathnames. Attackers can embed shell syntax in log file names or the --dir parameter to execute arbitrary commands with the privileges of the operator running alogsplit. | ||||
| CVE-2026-80885 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix uncancelled rxrpc OOB message handler Fix AFS to cancel its OOB message processing (typically to respond to security challenges). Also move OOB message processing to afs_wq so that it's also waited for and make the OOB handler just return if the net namespace is no longer live. | ||||
| CVE-2026-80789 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies. | ||||
| CVE-2026-80794 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix uninit-value in the RF discover/activated NTF handlers nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each parse a notification into an on-stack struct (nci_rf_discover_ntf / nci_rf_intf_activated_ntf) that is not initialised. The RF technology-specific parameters are only extracted when rf_tech_specific_params_len is non-zero, so a notification that reports a zero length leaves the rf_tech_specific_params union uninitialised - and both handlers then pass it to nci_add_new_protocol(), which reads it: - discover: nci_add_new_target() -> nci_add_new_protocol(); - activated: nci_target_auto_activated() -> nci_add_new_protocol(). nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch condition and a memcpy() length and copies nfcid1/sens_res/sel_res into ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET. BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0 nci_add_new_protocol+0x624/0x6c0 nci_ntf_packet+0x25b2/0x3c30 nci_rx_work+0x318/0x5d0 process_scheduled_works+0x84b/0x17a0 worker_thread+0xc10/0x11b0 kthread+0x376/0x500 Local variable ntf.i created at: nci_ntf_packet+0xbc2/0x3c30 Zero-initialise both on-stack notifications so the union reads back as zero when no technology-specific parameters are present. | ||||
| CVE-2026-80887 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: use check_add_overflow for shader size+offset bound vmw_shader_define() validates the user-supplied shader window against its backing buffer with (u64)buffer->tbo.base.size < (u64)size + (u64)offset drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is near U64_MAX the unsigned addition wraps and the resulting tiny value passes the check. The unbounded offset is then stored in res->guest_memory_offset and forwarded to host SVGA shader-create commands. Use check_add_overflow() to detect the wrap and compare the resulting endpoint against the buffer size. | ||||
| CVE-2026-80832 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qce - fix CCM AAD buffer underallocation The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen() can be smaller than the length later programmed into the DMA scatterlist. The allocation size is currently calculated as: ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN while the DMA length is set to: ALIGN(assoclen + adata_header_len, 16) Since ALIGN() does not distribute over addition, the allocation can be smaller than the DMA length. For example, when assoclen = 32 and adata_header_len = 2: allocation = ALIGN(32, 16) + 6 = 38 DMA length = ALIGN(32 + 2, 16) = 48 As a result, the QCE hardware can read beyond the allocated buffer while computing the CBC-MAC over the associated data. The extra bytes are folded into the authentication tag, resulting in an incorrect tag and causing CCM self-test failures such as: alg: aead: ccm-aes-qce encryption test failed (wrong result) on test vector 8 Fix the allocation by adding the maximum possible AAD header length before alignment: ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16) This guarantees that the allocated buffer is large enough for the fully padded AAD data for all supported header sizes. | ||||
| CVE-2026-80871 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: xilinx-trng - Remove crypto_rng interface Implementing the crypto_rng interface has no purpose, as it isn't used in practice. It's being removed from other drivers too. Just remove it. This leaves hwrng, which is actually used. Tagging with 'Cc stable' due to the bugs that this removes: - xtrng_trng_generate() sometimes returned success even when it didn't fill in all the bytes. - It was possible for xtrng_trng_generate() and xtrng_hwrng_trng_read() to run concurrently and interfere with each other, as the locking code in xtrng_hwrng_trng_read() was broken. | ||||
| CVE-2025-67041 | 1 Lantronix | 5 Eds3000ps, Eds3008ps1ns, Eds3008ps1ns Firmware and 2 more | 2026-09-04 | 7.2 High |
| An issue was discovered in Lantronix EDS3000PS 3.1.0.0R2. The host parameter of the TFTP client in the Filesystem Browser page is not properly sanitized. This can be exploited to escape from the original command and execute an arbitrary one with root privileges. | ||||
| CVE-2026-64367 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2025-70082 | 1 Lantronix | 5 Eds3000ps, Eds3008ps1ns, Eds3008ps1ns Firmware and 2 more | 2026-09-04 | 2.7 Low |
| The administrator password can be changed without knowledge of the current password. When chained with an authentication bypass vulnerability, this issue may allow unauthenticated attackers to modify the administrator password. | ||||
| CVE-2025-67037 | 1 Lantronix | 7 Eds5000, Eds5008, Eds5008 Firmware and 4 more | 2026-09-04 | 7.2 High |
| An issue was discovered in Lantronix EDS5000 2.1.0.0R3. An authenticated attacker can inject OS commands into the "tunnel" parameter when killing a tunnel connection. Injected commands are executed with root privileges. | ||||