Export limit exceeded: 429022 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 112282 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (112282 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-1883 2026-04-15 7.8 High
Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJ file.
CVE-2025-1646 2026-04-15 7.3 High
A vulnerability, which was classified as critical, has been found in Lumsoft ERP 8. Affected by this issue is some unknown functionality of the file /Api/TinyMce/UploadAjaxAPI.ashx of the component ASPX File Handler. The manipulation of the argument file leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-1706 2026-04-15 7.5 High
Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions.
CVE-2024-45044 1 Bareos 1 Bareos 2026-04-15 8.8 High
Bareos is open source software for backup, archiving, and recovery of data for operating systems. When a command ACL is in place and a user executes a command in bconsole using an abbreviation (i.e. "w" for "whoami") the ACL check did not apply to the full form (i.e. "whoami") but to the abbreviated form (i.e. "w"). If the command ACL is configured with negative ACL that should forbid using the "whoami" command, you could still use "w" or "who" as a command successfully. Fixes for the problem are shipped in Bareos versions 23.0.4, 22.1.6 and 21.1.11. If only positive command ACLs are used without any negation, the problem does not occur.
CVE-2024-43778 1 Takenaka Engineering 9 Ahd04t-a Firmware, Ahd08t-a Firmware, Ahd16t-a Firmware and 6 more 2026-04-15 8.8 High
OS command injection vulnerability in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
CVE-2025-32380 2026-04-15 7.5 High
The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router's usage of Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. This could lead to excessive resource consumption and denial of service. Apollo Router's usage of Apollo Compiler has been updated so that validation logic processes each named fragment only once, preventing redundant traversal. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.
CVE-2025-56399 2 Alexusmai, Laravel 2 Laravel-file-manager, Laravel 2026-04-15 8.8 High
alexusmai laravel-file-manager 3.3.1 and before allows an authenticated attacker to achieve Remote Code Execution (RCE) through a crafted file upload. A file with a '.png` extension containing PHP code can be uploaded via the file manager interface. Although the upload appears to fail client-side validation, the file is still saved on the server. The attacker can then use the rename API to change the file extension to `.php`, and upon accessing it via a public URL, the server executes the embedded code.
CVE-2022-50642 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: zero out stale pointers `cros_typec_get_switch_handles` allocates four pointers when obtaining type-c switch handles. These pointers are all freed if failing to obtain any of them; therefore, pointers in `port` become stale. The stale pointers eventually cause use-after-free or double free in later code paths. Zeroing out all pointer fields after freeing to eliminate these stale pointers.
CVE-2024-8299 2 Iconics, Mitsubishielectric 2 Genesis64, Mc Works64 2026-04-15 7.8 High
Uncontrolled Search Path Element vulnerability in Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric Hyper Historian versions 10.97.3 and prior, Mitsubishi Electric GENESIS32 all versions, Mitsubishi Electric MC Works64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions Hyper Historian versions 10.97.3 and prior, and Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions allows a local authenticated attacker to execute a malicious code by storing a specially crafted DLL in a specific folder. This could lead to disclose, tamper with, destroy, or delete information in the affected products, or to cause a denial of service (DoS) condition on the products.
CVE-2022-50638 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search caused by bad boot loader inode We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:203! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349 RIP: 0010:ext4_es_end.isra.0+0x34/0x42 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __es_tree_search.isra.0+0x6d/0xf5 ext4_es_cache_extent+0xfa/0x230 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_mpage_readpages+0x48e/0xe40 ext4_readahead+0x47/0x50 read_pages+0x82/0x530 page_cache_ra_unbounded+0x199/0x2a0 do_page_cache_ra+0x47/0x70 page_cache_ra_order+0x242/0x400 ondemand_readahead+0x1e8/0x4b0 page_cache_sync_ra+0xf4/0x110 filemap_get_pages+0x131/0xb20 filemap_read+0xda/0x4b0 generic_file_read_iter+0x13a/0x250 ext4_file_read_iter+0x59/0x1d0 vfs_read+0x28f/0x460 ksys_read+0x73/0x160 __x64_sys_read+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== In the above issue, ioctl invokes the swap_inode_boot_loader function to swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and disordered extents, and i_nlink is set to 1. The extents check for inode in the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO. While links_count is set to 1, the extents are not initialized in swap_inode_boot_loader. After the ioctl command is executed successfully, the extents are swapped to inode<12>, in this case, run the `cat` command to view inode<12>. And Bug_ON is triggered due to the incorrect extents. When the boot loader inode is not initialized, its imode can be one of the following: 1) the imode is a bad type, which is marked as bad_inode in ext4_iget and set to S_IFREG. 2) the imode is good type but not S_IFREG. 3) the imode is S_IFREG. The BUG_ON may be triggered by bypassing the check in cases 1 and 2. Therefore, when the boot loader inode is bad_inode or its imode is not S_IFREG, initialize the inode to avoid triggering the BUG.
CVE-2024-52587 1 Step Security 1 Harden Runner 2026-04-15 8.8 High
StepSecurity's Harden-Runner provides network egress filtering and runtime security for GitHub-hosted and self-hosted runners. Versions of step-security/harden-runner prior to v2.10.2 contain multiple command injection weaknesses via environment variables that could potentially be exploited under specific conditions. However, due to the current execution order of pre-steps in GitHub Actions and the placement of harden-runner as the first step in a job, the likelihood of exploitation is low as the Harden-Runner action reads the environment variable during the pre-step stage. There are no known exploits at this time. Version 2.10.2 contains a patch.
CVE-2025-24527 1 Akamai 1 Enterprise Application Access 2026-04-15 8 High
An issue was discovered in Akamai Enterprise Application Access (EAA) before 2025-01-17. If an admin knows another tenant's 128-bit connector GUID, they can execute debug commands on that connector.
CVE-2024-5348 2026-04-15 8.8 High
The Elements For Elementor plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.1 via the 'beforeafter_layout' attribute of the beforeafter widget, the 'eventsgrid_layout' attribute of the eventsgrid and list widgets, the 'marquee_layout' attribute of the marquee widget, the 'postgrid_layout' attribute of the postgrid widget, the 'woocart_layout' attribute of the woocart widget, and the 'woogrid_layout' attribute of the woogrid widget. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included.
CVE-2025-57393 1 Kissflow 1 Work Platform 2026-04-15 8.8 High
A stored cross-site scripting (XSS) in Kissflow Work Platform Kissflow Application Versions 7337 Account v2.0 to v4.2vallows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload.
CVE-2024-5345 1 Thenahidul 1 Responsive Owl Carousel For Elementor 2026-04-15 8.8 High
The Responsive Owl Carousel for Elementor plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.2.0 via the layout parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. The inclusion is limited to PHP files.
CVE-2025-57457 1 Curo 1 Uc300 2026-04-15 8.8 High
An OS Command Injection vulnerability in the Admin panel in Curo UC300 5.42.1.7.1.63R1 allows local attackers to inject arbitrary OS Commands via the "IP Addr" parameter.
CVE-2025-57483 1 Tawk 1 Tawk.to 2026-04-15 8.1 High
A reflected cross-site scripting (XSS) vulnerability in tawk.to chatbox widget v4 allows attackers to execute arbitrary Javascript in the context of the user's browser via injecting a crafted payload into the vulnerable parameter.
CVE-2025-57440 1 Blackmagic 1 Atem Mini Pro 2026-04-15 7.5 High
The Blackmagic ATEM Mini Pro 2.7 exposes an undocumented Telnet service on TCP port 9993, which accepts unauthenticated plaintext commands for controlling streaming, recording, formatting storage devices, and system reboot. This interface, referred to as the "ATEM Ethernet Protocol 1.0", provides complete device control without requiring credentials or encryption. An attacker on the same network (or with remote access to the exposed port) can exploit this interface to execute arbitrary streaming commands, erase disks, or shut down the device - effectively gaining full remote control.
CVE-2025-59530 1 Quic-go Project 1 Quic-go 2026-04-15 7.5 High
quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames.
CVE-2025-20241 1 Cisco 4 Nexus, Nexus 3000, Nexus 9000 and 1 more 2026-04-15 7.4 High
A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, adjacent attacker to cause the IS-IS process to unexpectedly restart, which could cause an affected device to reload. This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device. A successful exploit could allow the attacker to cause the unexpected restart of the IS-IS process, which could cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device.