| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient clearing of GPU global memory could allow a malicious process running on the same GPU to read left over memory values potentially leading to loss of confidentiality. |
| A Use After Free vulnerability on UniFi Protect Cameras could allow a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras management network. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` . |
| A vulnerability ( CVE-2024-38229 https://www.cve.org/CVERecord ) exists in EOL ASP.NET when closing an HTTP/3 stream while application code is writing to the response body, a race condition may lead to use-after-free, resulting in Remote Code Execution.
Per CWE-416: Use After Free https://cwe.mitre.org/data/definitions/416.html , Use After Free is when a product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.
This issue affects EOL ASP.NET 6.0.0 <= 6.0.36 as represented in this CVE, as well as 8.0.0 <= 8.0.8, 9.0.0-preview.1.24081.5 <= 9.0.0.RC.1 as represented in CVE-2024-38229 https://www.cve.org/CVERecord .
Additionally, if you've deployed self-contained applications https://docs.microsoft.com/dotnet/core/deploying/#self-contained-deployments-scd targeting any of the impacted versions, these applications are also vulnerable and must be recompiled and redeployed.
NOTE: This CVE only represents End Of Life (EOL) software components. The vendor, Microsoft, has indicated there will be no future updates nor support provided upon inquiry. |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. |
| Missing lock check in SynHsaService may create a use-after-free condition which causes abnormal termination of the service, resulting in denial of service for the Synaptics Hardware Support App. |
| A vulnerability was determined in appneta tcpreplay up to 4.5.2-beta2. The impacted element is the function untrunc_packet of the file src/tcpedit/edit_packet.c of the component tcprewrite. Executing manipulation can lead to use after free. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. This patch is called 73008f261f1cdf7a1087dc8759115242696d35da. Applying a patch is advised to resolve this issue. |
| An Improper Resource Locking vulnerability in the SDM component of B&R Automation Runtime versions before 6.3 and before Q4.93 may allow an unauthenticated network-based attacker to delete data causing denial of service conditions. |
| When a WF200/WGM160P device is configured to operate as an Access Point, it may be vulnerable to a denial of service triggered by a malformed packet. The device may recover automatically or require a hard reset. |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
| Trimble SketchUp SKP File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Trimble SketchUp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of SKP files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27769. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A double free vulnerability has been identified in the ASUS System Analysis service. This vulnerability can be triggered by sending specially crafted local RPC requests, leading to the service crash and potentially memory manipulation in some rare circumstances.
Refer to the 'Security Update for MyASUS' section on the ASUS Security Advisory for more information. |
| A vulnerability in the Palo Alto Networks PAN-OS software enables an authenticated admin on the PAN-OS CLI to read arbitrary files.
The attacker must have network access to the management interface (web, SSH, console, or telnet) and successfully authenticate to exploit this issue. You can greatly reduce the risk of this issue by restricting access to the management interface to only trusted users and internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue does not affect Cloud NGFW or Prisma Access. |
| Use after free in the UEFI firmware of some Intel(R) Server M20NTP BIOS may allow a privileged user to potentially enable escalation of privilege via local access. |
| A flaw was found in PyO3. This vulnerability causes a use-after-free issue, potentially leading to memory corruption or crashes via unsound borrowing from weak Python references. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
