Export limit exceeded: 25263 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25263 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98228 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000 [ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9 [ 34.133726] $24 : 0000000000000006 00000001200406e0 [ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4 [ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428 [ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428 [ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE [ 34.166551] Cause : 40800408 (ExcCode 02) [ 34.170574] BadVA : 0000000000000000 [ 34.174161] PrId : 0001b028 (MIPS I6500) [ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780) [ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0 [ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80 [ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500 [ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001 [ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff [ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000 [ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000 [ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000 [ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500 [ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000 [ 34.269103] ... [ 34.271568] Call Trace: [ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428 [ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318 [ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138 [ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68 [ 34.295187] [ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3 [ 34.306504] [ 34.308099] ---[ end trace 0000000000000000 ]--- My initial reproducer was the xdp-tools test suite. A standalone reproducer would be an lld/scd loop that, when the read is reordered by the CPU, triggers a fault. We can achieve this from userspace by stressing an anonymous pipe, which uses a mutex. Program used: // SPDX-License-Identifier: GPL-2.0 // pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c // // Two userspace processes on an anonymous pipe: // parent = writer: tight write() loop // child = reader: tight read() loop #define _GNU_SOURCE #include <assert.h> #include <errno.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include ---truncated--- | ||||
| CVE-2026-98283 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable, gp->shadow_lpid and gp->l1_host all touch freed memory. The free path is fully L1-controlled. Fix this by incrementing gp->refcnt inside the loop before dropping mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the reference with kvmhv_put_nested() after the per-guest work completes. This is the same get/put discipline already used at every other call site that drops mmu_lock while holding a nested-guest pointer. | ||||
| CVE-2026-98315 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls runlist helpers that require the runlist write lock, but did not hold it while freeing clusters and truncating the runlist. Serialize those operations and the resident conversion with the runlist lock. ntfs_attr_map_cluster() can merge a newly allocated run before updating mapping pairs. If the update fails, free the clusters and restore both the in-memory runlist and on-disk mapping pairs from a saved runlist. Mark the volume in error if either rollback step fails. | ||||
| CVE-2026-98323 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length. | ||||
| CVE-2026-98229 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final drop callback reports the current state's protocol. If secpath_reset() drops the last state reference while the state is concurrently deleted, xfrm_input() can still dereference the freed state when selecting transport_finish() or reporting the drop callback protocol. Save the state protocol on the stack while the state is still valid, and use the already saved address family for transport_finish(). A larval XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This preserves the existing drop-path fallback while avoiding the post-reset state dereferences without adding an extra state reference to every received packet. | ||||
| CVE-2026-98349 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() and the libipw_network_init() call it makes assume the frame contains the full 36-byte beacon and probe response prefix, but the ipw2100 and ipw2200 receive paths only establish that a management frame carries the generic 24-byte three-address header. libipw_network_init() then computes the information element length as stats->len - sizeof(*beacon) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() yields 65524 for a 24-byte beacon, and the parser then walks the receive buffer as if it held almost 64 KiB of information elements, reading past the allocation. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device. | ||||
| CVE-2026-98101 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro. | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98241 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk(). | ||||
| CVE-2026-98282 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'. | ||||
| CVE-2026-98243 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference" changed the check to test for the ops pointer instead of the signaled bit to avoid a potential NULL dereference when the ops pointer has been cleared. The problem is now that the ops pointer is cleared only when neither the release nor the wait callback is implemented and this isn't true for a lot of dma_fence implementations yet. So those implementations lost the RCU protection after signaling of the returned string resulting in potential use after free. Add the signaling check additional to the ops pointer check so that we have both the protection against NULL dereference as well as the RCU protection after signaling for the returned string. v2: improve comments to note RCU protection and explain why we check both signaling state and ops pointer v3: some comment improvements suggested by Philip | ||||
| CVE-2026-98251 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: avoid reallocating confirmed conntrack labels ovs_ct_get_conn_labels() adds the labels extension when a conntrack entry does not have one. Confirmed conntracks can be read locklessly, so adding an extension may reallocate and free the extension block while another CPU accesses it. Only add the extension for unconfirmed conntracks. A confirmed conntrack without labels now fails the caller's label operation instead of reallocating its extension storage. | ||||
| CVE-2026-98256 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated--- | ||||
| CVE-2026-98318 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate absolute native symlink targets before NT fixups With symlinkroot unset, an absolute target is copied without conversion to an NT drive path. Later code still assumes an NT prefix is present when modifying the target and calculating the print name length. For "/ab", this causes two failures: sym[5] and path[5] are written past their allocations, and plen -= 2 * poff subtracts an assumed 8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534. That underflow causes another overflow: memcpy() copies 65534 bytes into a 24-byte buffer. A user with write access to a mounted share can trigger these bugs with default settings. Validate the NT drive prefix, including an ASCII drive letter, before accessing fixed offsets or subtracting the prefix length. | ||||
| CVE-2026-98320 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe semantics also allow to refer to the wrong conntrack from the flowtable datapath. Hold reference on ct until flow is released after rcu grace period. Add rcu_barrier() on module exit path, to ensure pending flow entries are release before module goes away. | ||||
| CVE-2026-98173 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of iface in cifs_try_adding_channels() cifs_try_adding_channels() iterates ses->iface_list with list_for_each_entry_safe_from(), which captures the next entry (niface) under iface_lock. The loop body then drops iface_lock for the whole duration of cifs_ses_add_channel(). A concurrent interface refresh (SMB3_request_interfaces() -> parse_server_interfaces()) marks all ifaces inactive and removes and frees any that are not re-advertised via list_del() + kref_put(), where release_iface() is a bare kfree(). Since niface typically has no channel holding a reference, the list reference is its last and it can be freed inside the unlocked window. On continue, the iterator advance step then dereferences niface->iface_head.next, and the loop body reads iface->rdma_capable/is_active, both on freed memory. Fix this by never keeping an unreferenced list pointer across the unlocked window. Each channel attempt now re-scans the list from the head under iface_lock, takes a kref on the selected candidate, and passes only that referenced candidate to cifs_ses_add_channel(). weight_fulfilled still tracks selection progress, so restarting the scan preserves the original weighted distribution and the weight_fulfilled-before-kref_put ordering on the failure path. Add a per-pass attempts cap so a flapping interface refresh cannot keep the inner loop spinning within a single tries increment. | ||||
| CVE-2026-98174 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next and ->prev to NULL instead of pointing to itself, making list_empty() always return false and list_add() dereference a NULL ->prev pointer. Also, cifs_signal_cifsd_for_reconnect() can be called concurrently from multiple cifsd threads, allowing the same server's rlist node to be added twice into the local list, corrupting it. | ||||
| CVE-2026-93225 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: fix typec switch leak on probe error path If probe fails after imx95_usb_phy_get_tca() succeeds, the typec switch leaks because the only cleanup path was in .remove(), which never runs on probe failure. Use devm_add_action_or_reset() so the switch is cleaned up on both probe failure and driver removal. The imx95_usb_phy_put_tca() is no longer needed, it will be removed in .remove() too. | ||||
| CVE-2026-98290 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup rfcomm_sock_cleanup_listen() closes unaccepted child sockets through rfcomm_sock_close(), which takes the child socket lock before rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these locks in reverse order while handling connections and DLC state changes, so lockdep reports a possible deadlock. Close dequeued children without taking their socket lock. The accept queue owns a reference to each child, and bt_accept_dequeue() locks the child while unlinking it and clearing its parent pointer. Dropping the child lock makes it important to prevent a concurrent rfcomm_connect_ind() from enqueueing a new child after cleanup observes an empty queue. Set a listening socket to BT_CLOSED while its lock is still held, before dropping the lock and draining the queue. The state check in rfcomm_connect_ind() then rejects new children once cleanup starts. | ||||
| CVE-2026-98330 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace is destroyed, cfg80211_pernet_exit() moves any wiphy back to the initial namespace, and just warns if that fails. But moving an interface can fail (due to allocation failures), and then the wiphy is left behind with a garbage netns pointer: Kernel mode fault at addr 0x30 genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211] nl80211_notify_wiphy+0xcd/0xe8 [cfg80211] wiphy_unregister+0x169/0x3fc [cfg80211] Note that commit debac3a20dec ("net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().") fixed another path that could reach it without allocation failures. Remove interfaces that cannot be moved instead of failing the switch, so that the wiphy always ends up in the initial namespace. In this case the netdev core will unregister the interfaces anyway. | ||||