Export limit exceeded: 395713 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395713 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395713 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90243 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down copied context entry copied_context_tear_down() zeroes the 128-bit context entry with context_clear_entry() while the Present bit is still set, and only then issues the context-cache and IOTLB invalidations. This leaves a window in which hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behaviour or spurious faults. While x86 provides strong write ordering, the compiler may reorder the writes to the two 64-bit halves of the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. There is no cacheline flush before the invalidation either, so on an IOMMU without coherent access to the context table the zeroed entry may not be visible to hardware at the point the invalidation is submitted. Apply the same ownership handshake described in the VT-d spec, Section 6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present bit, flush it out to the IOMMU, perform the invalidations, and only then zero the remainder of the entry. | ||||
| CVE-2026-90247 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock leak in irq_work path stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the same mmap_unlock_work. Both callers only check whether the work is busy before taking mmap_lock, so a nested caller can reuse the slot before the first caller queues it. Two read locks may then be acquired while only one deferred unlock runs, leaking a read lock and blocking exit_mmap(). Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper in stackmap and bpf_find_vma() so both callers release the reservation on trylock failure. Keep rejecting the slot while the irq_work remains busy. Release it after the irq_work callback unlocks the mm. | ||||
| CVE-2026-90257 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len - 1. A short or unterminated response then prints as much as arrived instead of failing setup. This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()"), which fixed the identical pattern. | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90270 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Disable driver unbind to avoid UAF When a user unbinds an MSC and that MSC is the only MSC left for a component then the corresponding mpam_component will be freed. If the user then goes on to read the schemata file in the resctrl filesystem then the mpam_component will be accessed from resctrl_arch_get_config() leading to a use after free. As the MPAM driver is not a module the unbind sysfs interface is the only way to trigger the remove. Instead of dealing with the complexity of allowing some unused MSC to unbind just remove the unbind sysfs interface. | ||||
| CVE-2026-90272 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to userspace, but it's never set by the BRBE driver. Zero initialize it as it should be according to the docs: * For the architectures whose raw branch records are * already stored in age order, the hw_idx should be 0. It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE now in case anyone is setting it and reading the value, but zero initializing the whole struct also protects against the same issue with new fields that are added in the future. | ||||
| CVE-2026-90275 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_frozen = 1 on the newly-allocated r1conf and nothing ever clears it, so every I/O to the array stalls permanently once _wait_barrier() sees it stuck at 1. This used to be harmless: level_store() called mddev_resume() right after pers->run(), which called raid1_quiesce(mddev, 0) and cleared array_frozen back to 0 regardless of what raid1_takeover() set. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removed that quiesce(mddev, 0) call, so the pre-set now sticks. setup_conf() already zero-initializes the new r1conf via kzalloc, so just don't set array_frozen here. Same class of bug as commit 892da88d1cd9 ("md/raid10: fix a 'conf->barrier' leakage in raid10_takeover()"), also triggered by b39f35ebe86d. | ||||
| CVE-2026-93190 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partner_pdos() copies the partner PDOs from the EC TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array. memcpy(caps_desc.pdo, resp->source_cap_pdos, sizeof(u32) * resp->source_cap_count); ... memcpy(caps_desc.pdo, resp->sink_cap_pdos, sizeof(u32) * resp->sink_cap_count); PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields from the EC. The only check is that they are not both zero. If either is larger than 7, the memcpy writes past the end of the array on the stack. A count of 255 overflows it by about 1 KB. The EC source arrays are only seven entries wide. A larger count reads past them too. The ChromeOS EC firmware caps these counts today, so a compliant setup does not hit this. The kernel should still validate these values rather than trust them. Validate the counts in cros_typec_register_partner_pdos() next to the memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS. The rest of cros_typec_handle_status() still runs so events are handled and cleared. | ||||
| CVE-2026-92404 | 2026-09-20 | 7.5 High | ||
| The MgoSync WordPress plugin before 2.1.7 does not have authorization controls on one of its REST API endpoints, allowing unauthenticated users to retrieve the stored WooCommerce API credentials, including a read/write consumer key and secret, from a configured site. | ||||
| CVE-2026-92425 | 2026-09-20 | 5.5 Medium | ||
| The Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.4 does not perform object-level authorisation checks on several of its host-management operations, allowing users who hold its own administrator-assigned custom role to read, modify and permanently delete other hosts' records and the WordPress user accounts linked to them. | ||||
| CVE-2017-20284 | 1 Caucho Technology | 1 Resin | 2026-09-20 | 7.5 High |
| Caucho Resin contains a path traversal vulnerability in the documentation webapp (resin-doc) that allows remote unauthenticated attackers to read arbitrary files by supplying a relative path through the inputFile request parameter of the jndi-appconfig tutorial servlet. Attackers can craft requests with directory traversal sequences to the servlet endpoint to read files outside the intended tutorial directory on the underlying system. Exploitation evidence was first observed by the Shadowserver Foundation on 2021-12-10. | ||||
| CVE-2026-93839 | 1 Modeltc | 1 Lightllm | 2026-09-20 | 9.8 Critical |
| LightLLM through 1.2.0 contains an authentication bypass vulnerability in the /pd_register WebSocket endpoint that allows unauthenticated attackers to register arbitrary nodes by supplying crafted JSON without peer address validation. Attackers can disclose full user prompts routed to their socket, trigger denial of service by replacing legitimate nodes, or make the PD Master issue requests to internal network addresses. | ||||
| CVE-2026-12402 | 2 Wordpress, Xootix | 2 Wordpress, Otp Login & Register Woocommerce | 2026-09-20 | 4.4 Medium |
| The OTP Login & Register Woocommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'fb-config' Setting in all versions up to, and including, 2.7.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. On multisite installations where administrators do not hold the unfiltered_html capability, this vulnerability can be leveraged to target the network super administrator. | ||||
| CVE-2026-9855 | 2 Hiroaki Miyashita, Wordpress | 2 Custom Field Template, Wordpress | 2026-09-20 | 6.5 Medium |
| The Custom Field Template plugin for WordPress is vulnerable to generic SQL Injection via the 'post_ID' parameter in all versions up to, and including, 2.7.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The capability check via current_user_can('edit_post', $id) is bypassable because WordPress internally casts $id to an integer for the permission evaluation while the full unsanitized string is preserved and passed to the SQL sink, and a valid nonce — which is also required — can be legitimately obtained by any Contributor-level user from the post edit screen. | ||||
| CVE-2026-5410 | 2 Davidanderson, Wordpress | 2 Redux Framework, Wordpress | 2026-09-20 | 6.4 Medium |
| The Redux Framework plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the spinner field in versions up to, and including, 4.5.13 This is due to insufficient input sanitization and output escaping. In the user_meta_save() function scalar values bypass the sanitization logic that only processes arrays, allowing the spinner field value to be stored in user meta without proper sanitization. Later, at line 56 of class-redux-spinner.php in the render() function, this value is rendered in an unquoted HTML attribute without escaping via '$data_string .= ' data-val=' . $this->value;'. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-90286 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to execute the next submission while the ME is still in the previous submission. After a VM flush, emit PFP_SYNC_ME on compute queues as well. | ||||
| CVE-2026-90290 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path. | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90292 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix use-after-free in siw_accept() siw_accept() looks up the QP supplied by userspace. If that QP is already in RTS, the function jumps to error cleanup before associating the incoming CEP with it. The cleanup tests whether qp->cep is non-NULL and assumes the current call installed the association. However, qp->cep can point to the CEP of an existing connection. The cleanup then drops a reference from the incoming cep, not qp->cep. Once the incoming endpoint loses its remaining references, this can free it before the subsequent cep->qp store, causing a use-after-free. It also clears the existing QP association. Only release the association reference when qp->cep is the incoming CEP. This preserves an existing association and avoids accessing the freed endpoint. | ||||
| CVE-2026-90293 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe. Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told it may use it. Allocating there keeps the existing property that a memory allocation failure cannot happen once the final Login Response is on the wire. The receive queue is already empty between the final Login Request and isert_post_recvm(); this moves the second point later, from a median of 92 us to 172 us over 1200 logins. Only an initiator that sends before it has been told to can reach that window, and on IB and RoCE its send is retried there until the buffers appear - isert_rdma_accept() asks for rnr_retry_count = 7. iWARP has no RNR flow control, so there the same send terminates the connection instead. Measured over rxe, 400 login cycles per run, with an initiator that does not wait: an instrumented build counted no entries to isert_recv_done() before the buffers are posted in 10 runs, where that initiator oopsed 8 of 10 unpatched runs and 5 of 10 with only the previous patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | ||||