Export limit exceeded: 412883 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412883 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-92429 | 2026-10-15 | 5.3 Medium | ||
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including marking unpaid orders as paid and cancelling completed orders. | ||||
| CVE-2026-92428 | 2026-10-15 | 5.3 Medium | ||
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including orders that were already paid or completed. | ||||
| CVE-2026-92409 | 2026-10-15 | 6.8 Medium | ||
| The Donation Thermometer WordPress plugin before 2.3.0 does not escape a colour value taken from a shortcode attribute before using it in an attribute of the generated legend markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when the page is viewed. | ||||
| CVE-2026-91076 | 2026-10-15 | 5.3 Medium | ||
| The Robokassa payment gateway for Woocommerce WordPress plugin before 1.9.0 does not verify the authenticity of an incoming payment-notification request before acting on the order named in it, allowing unauthenticated attackers to force any WooCommerce order into a failed state. Order identifiers are sequential, so every order in the shop can be taken out of the fulfilment queue one request at a time. | ||||
| CVE-2026-90989 | 2026-10-15 | 4.3 Medium | ||
| The Tainacan WordPress plugin before 1.4.0 does not restrict its reports REST endpoints to users with a management capability, allowing any authenticated subscriber to read the email addresses of the repository's staff. | ||||
| CVE-2026-90412 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix return status of RMI log page on allocation failure nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS (set by the successful nvmet_req_find_ns() call) when the kzalloc() for the log buffer fails. It then jumps to the out label and completes the request with a success status, so the host is told the command succeeded while no data was transferred. Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler, so an allocation failure is reported as an internal error. | ||||
| CVE-2026-90401 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90355 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: clear stale link state on full reset After a full chip reset, mac80211 reconfig replays interface, link and channel context setup. mt7996_vif_link_add() short-circuits when the link_id is still marked in mvif->valid_links, a state introduced for postponing link teardown to interface removal. The reset path frees the link structures without clearing those bits, so the replayed setup never re-creates dev_info/bss_info/STA records in the restarted firmware and never re-registers the link wcid, leaving the device inoperative. The reset path also leaks every allocated MLD index: per-link indices and the per-vif group/remap indices are re-allocated from scratch during reconfig, but the old bits stay set in the masks, so repeated full resets exhaust the index space. Clear valid_links in the reset vif iterator and reset the MLD index masks alongside the existing omac_mask clearing. | ||||
| CVE-2026-90323 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: validate auto buf reg before taking uring_cmd With UBLK_F_AUTO_BUF_REG, invalid sqe->addr can fail after ublk_fill_io_cmd() has set UBLK_IO_FLAG_ACTIVE. The uring_cmd is completed while the tag stays active, which can hang teardown. Split validation from buffer apply so the check has no side effects, then take the uring_cmd and store the already-validated buffer. Apply the same order in FETCH so io->buf is not written before __ublk_fetch() state checks. | ||||
| CVE-2026-90317 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This preserves valid pointers in non-sleepable programs and inside an explicit RCU read-side section. | ||||
| CVE-2026-90315 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers Currently, the legacy I/O and memory sysfs handlers do not check security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and legacy_mem files unprotected when the kernel is locked down. Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") added the check to pci_write_config(), pci_mmap_resource(), and pci_write_resource_io() to prevent userspace from programming DMA-capable hardware that could be used to modify kernel code, but did not cover the legacy handlers. As a result, root can still write arbitrary I/O ports and map the legacy I/O and memory spaces while the kernel is locked down, which is the same capability the lockdown is meant to remove. Add the same check to pci_write_legacy_io(), pci_mmap_legacy_mem(), and pci_mmap_legacy_io(). These generic handlers cover both architectures that define HAVE_PCI_LEGACY (such as Alpha and PowerPC). [bhelgaas: add Link] | ||||
| CVE-2026-90261 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: flush active metadata block group at btree_writepages() start btree_writepages() writes the btree inode's dirty metadata in ascending logical address order. On a zoned filesystem only one metadata and one system block group is active for writing at a time, and check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the active block group as writeback moves from one block group to the next. If the active block group sits at a higher logical address than another block group that also holds dirty metadata, the ascending walk reaches the lower one first and, to write it, has to finish the active block group and activate the lower one. It cannot finish a block group that still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit) writeback it deliberately refuses to wait for that IO under fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot issue the submission itself either, so it gives up: btrfs_check_meta_write_pointer() returns -EAGAIN, which btrfs_write_and_wait_transaction() treats as fatal and aborts the transaction, forcing the filesystem read-only. This happens intermittently under metadata-heavy relocation (e.g. fstests btrfs/187). Flush the active metadata and system block groups at the start of btree_writepages(), under the fs_info->zoned_meta_io_lock it already holds, so they have no unsent IO left and the later pivot can finish them and make forward progress. | ||||
| CVE-2026-90242 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() enables IOPF for the new domain but never disables it for the old one. device_block_translation(), called at the start of the function, tears down translation but does not touch any IOPF state; blocking_domain_attach_dev() has to call iopf_for_domain_remove() explicitly before invoking it for exactly this reason. identity_domain_attach_dev() has the same problem. Its comment claims that no PRI handling is needed because the device has been put in the blocking state, but the blocking state and the IOPF reference count are independent of each other. As a result, replacing a domain that has an iopf_handler with another domain at RID level leaks a reference in info->iopf_refcount. The count never drops back to zero, so iopf_queue_remove_device() is never called and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount) when the device is released. The PASID paths already handle this correctly by way of iopf_for_domain_replace(); convert the two RID paths to do the same. Using the replace helper rather than a bare remove keeps the enable before the disable, so the reference count does not transiently reach zero and evict the device from the IOPF queue. | ||||
| CVE-2026-90121 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed. | ||||
| CVE-2026-90095 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OVER_IO_URING flag in early RFC versions. If there should be a report from any library or application we probably need to revert this commit. | ||||
| CVE-2026-90082 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count(). | ||||
| CVE-2026-90079 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mutex_init() was also re-run on the AF-VF path while AF-PF mailbox handlers could still hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release cn20k mailbox DMA either, since cleanup only happened in rvu_remove(). Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the same block, unwind only the mailbox memory for the failing init type, and free cn20k mailbox DMA from the probe and pci_enable_sriov() error paths. | ||||
| CVE-2026-90040 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated--- | ||||