Export limit exceeded: 22561 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22561 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50857 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: rio: fix possible name leak in rio_register_mport() If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports. | ||||
| CVE-2022-50855 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent leak of lsm program after failed attach In [0], we added the ability to bpf_prog_attach LSM programs to cgroups, but in our validation to make sure the prog is meant to be attached to BPF_LSM_CGROUP, we return too early if the check fails. This results in lack of decrementing prog's refcnt (through bpf_prog_put) leaving the LSM program alive past the point of the expected lifecycle. This fix allows for the decrement to take place. [0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ | ||||
| CVE-2025-39996 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAF This is confirmed by a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff8880093aa8c8 by task bash/135 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug. | ||||
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2022-50845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode leak in ext4_xattr_inode_create() on an error path There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2023-53766 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Check for read-only mounted filesystem in txBegin This patch adds a check for read-only mounted filesystem in txBegin before starting a transaction potentially saving from NULL pointer deref. | ||||
| CVE-2022-50560 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: explicitly remove aggregate driver at module unload time Because component_master_del wasn't being called when unloading the meson_drm module, the aggregate device would linger forever in the global aggregate_devices list. That means when unloading and reloading the meson_dw_hdmi module, component_add would call into try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate device. This would in turn dereference some of the aggregate_device's struct entries which point to memory automatically freed by the devres API when unbinding the aggregate device from meson_drv_unbind, and trigger an use-after-free bug: [ +0.000014] ============================================================= [ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500 [ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536 [ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000005] dump_backtrace+0x1ec/0x280 [ +0.000011] show_stack+0x24/0x80 [ +0.000007] dump_stack_lvl+0x98/0xd4 [ +0.000010] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000007] __asan_report_load8_noabort+0x3c/0x50 [ +0.000009] find_components+0x468/0x500 [ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390 [ +0.000009] __component_add+0x1dc/0x49c [ +0.000009] component_add+0x20/0x30 [ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi] [ +0.000013] platform_probe+0xd0/0x220 [ +0.000008] really_probe+0x3ac/0xa80 [ +0.000008] __driver_probe_device+0x1f8/0x400 [ +0.000008] driver_probe_device+0x68/0x1b0 [ +0.000008] __driver_attach+0x20c/0x480 [ +0.000009] bus_for_each_dev+0x114/0x1b0 [ +0.000007] driver_attach+0x48/0x64 [ +0.000009] bus_add_driver+0x390/0x564 [ +0.000007] driver_register+0x1a8/0x3e4 [ +0.000009] __platform_driver_register+0x6c/0x94 [ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi] [ +0.000014] do_one_initcall+0xc4/0x2b0 [ +0.000008] do_init_module+0x154/0x570 [ +0.000010] load_module+0x1a78/0x1ea4 [ +0.000008] __do_sys_init_module+0x184/0x1cc [ +0.000008] __arm64_sys_init_module+0x78/0xb0 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000008] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] Allocated by task 902: [ +0.000007] kasan_save_stack+0x2c/0x5c [ +0.000009] __kasan_kmalloc+0x90/0xd0 [ +0.000007] __kmalloc_node+0x240/0x580 [ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac [ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0 [ +0.000008] kmem_cache_alloc_node+0x1d0/0x490 [ +0.000009] __alloc_skb+0x1d4/0x310 [ +0.000010] alloc_skb_with_frags+0x8c/0x620 [ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0 [ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0 [ +0.000010] sock_sendmsg+0xcc/0x110 [ +0.000007] sock_write_iter+0x1d0/0x304 [ +0.000008] new_sync_write+0x364/0x460 [ +0.000007] vfs_write+0x420/0x5ac [ +0.000008] ksys_write+0x19c/0x1f0 [ +0.000008] __arm64_sys_write+0x78/0xb0 [ +0.000007] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000008] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000013] Freed by task 2509: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000007] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000008] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000010] ---truncated--- | ||||
| CVE-2025-40107 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks. | ||||
| CVE-2025-40137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate first page in error path of f2fs_truncate() syzbot reports a bug as below: loop0: detected capacity change from 0 to 40427 F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix. ------------[ cut here ]------------ kernel BUG at fs/inode.c:753! RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753 Call Trace: <TASK> evict+0x504/0x9c0 fs/inode.c:810 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f During f2fs_evict_inode(), clear_inode() detects that we missed to truncate all page cache before destorying inode, that is because in below path, we will create page #0 in cache, but missed to drop it in error path, let's fix it. - evict - f2fs_evict_inode - f2fs_truncate - f2fs_convert_inline_inode - f2fs_grab_cache_folio : create page #0 in cache - f2fs_convert_inline_folio : sanity check failed, return -EFSCORRUPTED - clear_inode detects that inode->i_data.nrpages is not zero | ||||
| CVE-2025-68327 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Fix synchronous external abort on unbind A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. | ||||
| CVE-2025-68329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely. | ||||
| CVE-2025-40066 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links() In order to avoid a possible NULL pointer dereference in mt7996_mac_sta_init_link routine, move the phy pointer check before running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine. | ||||
| CVE-2022-50846 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||
| CVE-2022-50851 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: fix the crash in unmap a large memory While testing in vIOMMU, sometimes Guest will unmap very large memory, which will cause the crash. To fix this, add a new function vhost_vdpa_general_unmap(). This function will only unmap the memory that saved in iotlb. Call Trace: [ 647.820144] ------------[ cut here ]------------ [ 647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174! [ 647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62 [ 647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4 [ 647.824365] RIP: 0010:domain_unmap+0x48/0x110 [ 647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59 [ 647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202 [ 647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b [ 647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540 [ 647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003 [ 647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff [ 647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000 [ 647.834782] FS: 00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000 [ 647.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0 [ 647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 647.840666] Call Trace: [ 647.841437] <TASK> [ 647.842107] intel_iommu_unmap_pages+0x93/0x140 [ 647.843112] __iommu_unmap+0x91/0x1b0 [ 647.844003] iommu_unmap+0x6a/0x95 [ 647.844885] vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa] [ 647.845985] vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa] [ 647.847235] ? _raw_spin_unlock+0x15/0x30 [ 647.848181] ? _copy_from_iter+0x8c/0x580 [ 647.849137] vhost_chr_write_iter+0xb3/0x430 [vhost] [ 647.850126] vfs_write+0x1e4/0x3a0 [ 647.850897] ksys_write+0x53/0xd0 [ 647.851688] do_syscall_64+0x3a/0x90 [ 647.852508] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 647.853457] RIP: 0033:0x7f7734ef9f4f [ 647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8 [ 647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f [ 647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010 [ 647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000 [ 647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010 [ 647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000 [ 647.864692] </TASK> [ 647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v] [ 647.874688] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||
| CVE-2025-68733 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix bug: unprivileged task can create labels If an unprivileged task is allowed to relabel itself (/smack/relabel-self is not empty), it can freely create new labels by writing their names into own /proc/PID/attr/smack/current This occurs because do_setattr() imports the provided label in advance, before checking "relabel-self" list. This change ensures that the "relabel-self" list is checked before importing the label. | ||||
| CVE-2025-68734 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe() In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when setup_instance() fails with an error code. Fix that by freeing the urb before freeing the hw structure. Also change the error paths to use the goto ladder style. Compile tested only. Issue found using a prototype static analysis tool. | ||||
| CVE-2023-53745 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: um: vector: Fix memory leak in vector_config If the return value of the uml_parse_vector_ifspec function is NULL, we should call kfree(params) to prevent memory leak. | ||||
| CVE-2025-40313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: pretend $Extend records as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. | ||||