Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 23085 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23085 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts via spin_lock_irq(). This also implicitly disables the handling of softirqs such as TIMER_SOFTIRQ. On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not disable them. That means a timer can be invoked during spin_lock_irq() on the same CPU. Due to synchronisations reasons local_bh_disable() has a per-CPU lock named softirq_ctrl.lock which synchronizes individual softirq against each other. syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This is a possible deadlock. The softirq_ctrl.lock can not be made part of spin_lock_irq() as this would lead to too much synchronisation against individual threads on the system. To avoid the possible deadlock, softirqs must be manually disabled before the lock is acquired. Disable softirqs before the lock is acquired on PREEMPT_RT. | ||||
| CVE-2025-40208 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. | ||||
| CVE-2025-68319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netconsole: Acquire su_mutex before navigating configs hierarchy There is a race between operations that iterate over the userdata cg_children list and concurrent add/remove of userdata items through configfs. The update_userdata() function iterates over the nt->userdata_group.cg_children list, and count_extradata_entries() also iterates over this same list to count nodes. Quoting from Documentation/filesystems/configfs.rst: > A subsystem can navigate the cg_children list and the ci_parent pointer > to see the tree created by the subsystem. This can race with configfs' > management of the hierarchy, so configfs uses the subsystem mutex to > protect modifications. Whenever a subsystem wants to navigate the > hierarchy, it must do so under the protection of the subsystem > mutex. Without proper locking, if a userdata item is added or removed concurrently while these functions are iterating, the list can be accessed in an inconsistent state. For example, the list_for_each() loop can reach a node that is being removed from the list by list_del_init() which sets the nodes' .next pointer to point to itself, so the loop will never end (or reach the WARN_ON_ONCE in update_userdata() ). Fix this by holding the configfs subsystem mutex (su_mutex) during all operations that iterate over cg_children. This includes: - userdatum_value_store() which calls update_userdata() to iterate over cg_children - All sysdata_*_enabled_store() functions which call count_extradata_entries() to iterate over cg_children The su_mutex must be acquired before dynamic_netconsole_mutex to avoid potential lock ordering issues, as configfs operations may already hold su_mutex when calling into our code. | ||||
| CVE-2025-40030 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: check the return value of pinmux_ops::get_function_name() While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. | ||||
| CVE-2025-68322 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Avoid crash due to unaligned access in unwinder Guenter Roeck reported this kernel crash on his emulated B160L machine: Starting network: udhcpc: started, v1.36.1 Backtrace: [<104320d4>] unwind_once+0x1c/0x5c [<10434a00>] walk_stackframe.isra.0+0x74/0xb8 [<10434a6c>] arch_stack_walk+0x28/0x38 [<104e5efc>] stack_trace_save+0x48/0x5c [<105d1bdc>] set_track_prepare+0x44/0x6c [<105d9c80>] ___slab_alloc+0xfc4/0x1024 [<105d9d38>] __slab_alloc.isra.0+0x58/0x90 [<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0 [<105b8e54>] __anon_vma_prepare+0x60/0x280 [<105a823c>] __vmf_anon_prepare+0x68/0x94 [<105a8b34>] do_wp_page+0x8cc/0xf10 [<105aad88>] handle_mm_fault+0x6c0/0xf08 [<10425568>] do_page_fault+0x110/0x440 [<10427938>] handle_interruption+0x184/0x748 [<11178398>] schedule+0x4c/0x190 BUG: spinlock recursion on CPU#0, ifconfig/2420 lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0 While creating the stack trace, the unwinder uses the stack pointer to guess the previous frame to read the previous stack pointer from memory. The crash happens, because the unwinder tries to read from unaligned memory and as such triggers the unalignment trap handler which then leads to the spinlock recursion and finally to a deadlock. Fix it by checking the alignment before accessing the memory. | ||||
| CVE-2025-40359 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix KASAN global-out-of-bounds warning When running "perf mem record" command on CWF, the below KASAN global-out-of-bounds warning is seen. ================================================================== BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0 Read of size 4 at addr ffffffffb721d000 by task dtlb/9850 Call Trace: kasan_report+0xb8/0xf0 cmt_latency_data+0x176/0x1b0 setup_arch_pebs_sample_data+0xf49/0x2560 intel_pmu_drain_arch_pebs+0x577/0xb00 handle_pmi_common+0x6c4/0xc80 The issue is caused by below code in __grt_latency_data(). The code tries to access x86_hybrid_pmu structure which doesn't exist on non-hybrid platform like CWF. WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big) So add is_hybrid() check before calling this WARN_ON_ONCE to fix the global-out-of-bounds access issue. | ||||
| CVE-2025-68190 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked() kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws remains NULL while ectx.ws_size is set, leading to a potential NULL pointer dereference in atom_get_src_int() when accessing WS entries. Return -ENOMEM on allocation failure to avoid the NULL dereference. | ||||
| CVE-2025-40355 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysfs: check visibility before changing group attribute ownership Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can hit WARN_ON() when trying to change owner of a file that isn't visible. See the trace below: WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30 CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025 RIP: 0010:__dev_change_net_namespace+0xb89/0xc30 [...] Call Trace: <TASK> ? if6_seq_show+0x30/0x50 do_setlink.isra.0+0xc7/0x1270 ? __nla_validate_parse+0x5c/0xcc0 ? security_capable+0x94/0x1a0 rtnl_newlink+0x858/0xc20 ? update_curr+0x8e/0x1c0 ? update_entity_lag+0x71/0x80 ? sched_balance_newidle+0x358/0x450 ? psi_task_switch+0x113/0x2a0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x346/0x3e0 ? sched_clock+0x10/0x30 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? __sys_bind+0xe3/0x110 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? sock_alloc_file+0x63/0xc0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? alloc_fd+0x12e/0x190 ? put_unused_fd+0x2a/0x70 ? do_sys_openat2+0xa2/0xe0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> Fix this by checking is_visible() before trying to touch the attribute. | ||||
| CVE-2025-40353 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Do not warn if the page is already tagged in copy_highpage() The arm64 copy_highpage() assumes that the destination page is newly allocated and not MTE-tagged (PG_mte_tagged unset) and warns accordingly. However, following commit 060913999d7a ("mm: migrate: support poisoned recover from migrate folio"), folio_mc_copy() is called before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the copy will be done again to the same destination page. Since copy_highpage() already set the PG_mte_tagged flag, this second copy will warn. Replace the WARN_ON_ONCE(page already tagged) in the arm64 copy_highpage() with a comment. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40352 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting the following warning when the BlueField-3 SOC is booted: BUG: key ffff00008a3402a8 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0 <snip> Call trace: lockdep_init_map_type+0x1d4/0x2a0 __kernfs_create_file+0x84/0x140 sysfs_add_file_mode_ns+0xcc/0x1cc internal_create_group+0x110/0x3d4 internal_create_groups.part.0+0x54/0xcc sysfs_create_groups+0x24/0x40 device_add+0x6e8/0x93c device_register+0x28/0x40 __hwmon_device_register+0x4b0/0x8a0 devm_hwmon_device_register_with_groups+0x7c/0xe0 mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc] platform_probe+0x70/0x110 The mlxbf_pmc driver must call sysfs_attr_init() during the initialization of the "count_clock" data structure to avoid this warning. | ||||
| CVE-2025-40346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). | ||||
| CVE-2025-40127 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: ks-sa - fix division by zero in ks_sa_rng_init Fix division by zero in ks_sa_rng_init caused by missing clock pointer initialization. The clk_get_rate() call is performed on an uninitialized clk pointer, resulting in division by zero when calculating delay values. Add clock initialization code before using the clock. drivers/char/hw_random/ks-sa-rng.c | 7 +++++++ 1 file changed, 7 insertions(+) | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40125 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx In __blk_mq_update_nr_hw_queues() the return value of blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx fails, later changing the number of hw_queues or removing disk will trigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk] kobjct_del() was called unconditionally even if sysfs creation failed. Fix it by checkig the kobject creation statusbefore deleting it. | ||||
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2025-40033 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable() pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL check, which could lead to a null pointer dereference. Move the pru assignment, ensuring we never dereference a NULL rproc pointer. | ||||
| CVE-2025-40034 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() When platform firmware supplies error information to the OS, e.g., via the ACPI APEI GHES mechanism, it may identify an error source device that doesn't advertise an AER Capability and therefore dev->aer_info, which contains AER stats and ratelimiting data, is NULL. pci_dev_aer_stats_incr() already checks dev->aer_info for NULL, but aer_ratelimit() did not, leading to NULL pointer dereferences like this one from the URL below: {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 {1}[Hardware Error]: event severity: corrected {1}[Hardware Error]: device_id: 0000:00:00.0 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2020 {1}[Hardware Error]: aer_cor_status: 0x00001000, aer_cor_mask: 0x00002000 BUG: kernel NULL pointer dereference, address: 0000000000000264 RIP: 0010:___ratelimit+0xc/0x1b0 pci_print_aer+0x141/0x360 aer_recover_work_func+0xb5/0x130 [8086:2020] is an Intel "Sky Lake-E DMI3 Registers" device that claims to be a Root Port but does not advertise an AER Capability. Add a NULL check in aer_ratelimit() to avoid the NULL pointer dereference. Note that this also prevents ratelimiting these events from GHES. [bhelgaas: add crash details to commit log] | ||||
| CVE-2025-40037 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: simplefb: Fix use after free in simplefb_detach_genpds() The pm_domain cleanup can not be devres managed as it uses struct simplefb_par which is allocated within struct fb_info by framebuffer_alloc(). This allocation is explicitly freed by unregister_framebuffer() in simplefb_remove(). Devres managed cleanup runs after the device remove call and thus can no longer access struct simplefb_par. Call simplefb_detach_genpds() explicitly from simplefb_destroy() like the cleanup functions for clocks and regulators. Fixes an use after free on M2 Mac mini during aperture_remove_conflicting_devices() using the downstream asahi kernel with Debian's kernel config. For unknown reasons this started to consistently dereference an invalid pointer in v6.16.3 based kernels. [ 6.736134] BUG: KASAN: slab-use-after-free in simplefb_detach_genpds+0x58/0x220 [ 6.743545] Read of size 4 at addr ffff8000304743f0 by task (udev-worker)/227 [ 6.750697] [ 6.752182] CPU: 6 UID: 0 PID: 227 Comm: (udev-worker) Tainted: G S 6.16.3-asahi+ #16 PREEMPTLAZY [ 6.752186] Tainted: [S]=CPU_OUT_OF_SPEC [ 6.752187] Hardware name: Apple Mac mini (M2, 2023) (DT) [ 6.752189] Call trace: [ 6.752190] show_stack+0x34/0x98 (C) [ 6.752194] dump_stack_lvl+0x60/0x80 [ 6.752197] print_report+0x17c/0x4d8 [ 6.752201] kasan_report+0xb4/0x100 [ 6.752206] __asan_report_load4_noabort+0x20/0x30 [ 6.752209] simplefb_detach_genpds+0x58/0x220 [ 6.752213] devm_action_release+0x50/0x98 [ 6.752216] release_nodes+0xd0/0x2c8 [ 6.752219] devres_release_all+0xfc/0x178 [ 6.752221] device_unbind_cleanup+0x28/0x168 [ 6.752224] device_release_driver_internal+0x34c/0x470 [ 6.752228] device_release_driver+0x20/0x38 [ 6.752231] bus_remove_device+0x1b0/0x380 [ 6.752234] device_del+0x314/0x820 [ 6.752238] platform_device_del+0x3c/0x1e8 [ 6.752242] platform_device_unregister+0x20/0x50 [ 6.752246] aperture_detach_platform_device+0x1c/0x30 [ 6.752250] aperture_detach_devices+0x16c/0x290 [ 6.752253] aperture_remove_conflicting_devices+0x34/0x50 ... [ 6.752343] [ 6.967409] Allocated by task 62: [ 6.970724] kasan_save_stack+0x3c/0x70 [ 6.974560] kasan_save_track+0x20/0x40 [ 6.978397] kasan_save_alloc_info+0x40/0x58 [ 6.982670] __kasan_kmalloc+0xd4/0xd8 [ 6.986420] __kmalloc_noprof+0x194/0x540 [ 6.990432] framebuffer_alloc+0xc8/0x130 [ 6.994444] simplefb_probe+0x258/0x2378 ... [ 7.054356] [ 7.055838] Freed by task 227: [ 7.058891] kasan_save_stack+0x3c/0x70 [ 7.062727] kasan_save_track+0x20/0x40 [ 7.066565] kasan_save_free_info+0x4c/0x80 [ 7.070751] __kasan_slab_free+0x6c/0xa0 [ 7.074675] kfree+0x10c/0x380 [ 7.077727] framebuffer_release+0x5c/0x90 [ 7.081826] simplefb_destroy+0x1b4/0x2c0 [ 7.085837] put_fb_info+0x98/0x100 [ 7.089326] unregister_framebuffer+0x178/0x320 [ 7.093861] simplefb_remove+0x3c/0x60 [ 7.097611] platform_remove+0x60/0x98 [ 7.101361] device_remove+0xb8/0x160 [ 7.105024] device_release_driver_internal+0x2fc/0x470 [ 7.110256] device_release_driver+0x20/0x38 [ 7.114529] bus_remove_device+0x1b0/0x380 [ 7.118628] device_del+0x314/0x820 [ 7.122116] platform_device_del+0x3c/0x1e8 [ 7.126302] platform_device_unregister+0x20/0x50 [ 7.131012] aperture_detach_platform_device+0x1c/0x30 [ 7.136157] aperture_detach_devices+0x16c/0x290 [ 7.140779] aperture_remove_conflicting_devices+0x34/0x50 ... | ||||
| CVE-2025-40121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed. | ||||