Export limit exceeded: 23085 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23085 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54078 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: max9286: Free control handler The control handler is leaked in some probe-time error paths, as well as in the remove path. Fix it. | ||||
| CVE-2022-50744 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a hard lockup similar to the call trace below may occur. The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer interrupts as expected, so change the strength of the spin lock to _irq. Kernel panic - not syncing: Hard LOCKUP CPU: 3 PID: 110402 Comm: cat Kdump: loaded exception RIP: native_queued_spin_lock_slowpath+91 [IRQ stack] native_queued_spin_lock_slowpath at ffffffffb814e30b _raw_spin_lock at ffffffffb89a667a lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc] lpfc_cmf_timer at ffffffffc0abbc67 [lpfc] __hrtimer_run_queues at ffffffffb8184250 hrtimer_interrupt at ffffffffb8184ab0 smp_apic_timer_interrupt at ffffffffb8a026ba apic_timer_interrupt at ffffffffb8a01c4f [End of IRQ stack] apic_timer_interrupt at ffffffffb8a01c4f lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc] lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc] full_proxy_read at ffffffffb83e7fc3 vfs_read at ffffffffb833fe71 ksys_read at ffffffffb83402af do_syscall_64 at ffffffffb800430b entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad | ||||
| CVE-2023-54126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Cleanup ring IRQ workqueues on load failure A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-54089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: add the missing REQ_OP_WRITE for flush bio When doing mkfs.xfs on a pmem device, the following warning was ------------[ cut here ]------------ WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct Modules linked in: CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:submit_bio_noacct+0x340/0x520 ...... Call Trace: <TASK> ? submit_bio_noacct+0xd5/0x520 submit_bio+0x37/0x60 async_pmem_flush+0x79/0xa0 nvdimm_flush+0x17/0x40 pmem_submit_bio+0x370/0x390 __submit_bio+0xbc/0x190 submit_bio_noacct_nocheck+0x14d/0x370 submit_bio_noacct+0x1ef/0x520 submit_bio+0x55/0x60 submit_bio_wait+0x5a/0xc0 blkdev_issue_flush+0x44/0x60 The root cause is that submit_bio_noacct() needs bio_op() is either WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail the flush bio. Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we could fix the flush order issue and do flush optimization later. | ||||
| CVE-2023-54307 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp_qoriq: fix memory leak in probe() Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. | ||||
| CVE-2023-54045 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix possible soft lockup in __audit_inode_child() Tracefs or debugfs maybe cause hundreds to thousands of PATH records, too many PATH records maybe cause soft lockup. For example: 1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n 2. auditctl -a exit,always -S open -k key 3. sysctl -w kernel.watchdog_thresh=5 4. mkdir /sys/kernel/debug/tracing/instances/test There may be a soft lockup as follows: watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498] Kernel panic - not syncing: softlockup: hung tasks Call trace: dump_backtrace+0x0/0x30c show_stack+0x20/0x30 dump_stack+0x11c/0x174 panic+0x27c/0x494 watchdog_timer_fn+0x2bc/0x390 __run_hrtimer+0x148/0x4fc __hrtimer_run_queues+0x154/0x210 hrtimer_interrupt+0x2c4/0x760 arch_timer_handler_phys+0x48/0x60 handle_percpu_devid_irq+0xe0/0x340 __handle_domain_irq+0xbc/0x130 gic_handle_irq+0x78/0x460 el1_irq+0xb8/0x140 __audit_inode_child+0x240/0x7bc tracefs_create_file+0x1b8/0x2a0 trace_create_file+0x18/0x50 event_create_dir+0x204/0x30c __trace_add_new_event+0xac/0x100 event_trace_add_tracer+0xa0/0x130 trace_array_create_dir+0x60/0x140 trace_array_create+0x1e0/0x370 instance_mkdir+0x90/0xd0 tracefs_syscall_mkdir+0x68/0xa0 vfs_mkdir+0x21c/0x34c do_mkdirat+0x1b4/0x1d4 __arm64_sys_mkdirat+0x4c/0x60 el0_svc_common.constprop.0+0xa8/0x240 do_el0_svc+0x8c/0xc0 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Therefore, we add cond_resched() to __audit_inode_child() to fix it. | ||||
| CVE-2025-68355 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exclusive map memory leak When excl_prog_hash is 0 and excl_prog_hash_size is non-zero, the map also needs to be freed. Otherwise, the map memory will not be reclaimed, just like the memory leak problem reported by syzbot [1]. syzbot reported: BUG: memory leak backtrace (crc 7b9fb9b4): map_create+0x322/0x11e0 kernel/bpf/syscall.c:1512 __sys_bpf+0x3556/0x3610 kernel/bpf/syscall.c:6131 | ||||
| CVE-2025-68326 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix stack_depot usage Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is enabled to fix the following call stack: [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] Workqueue: drm_sched_run_job_work [gpu_sched] [] RIP: 0010:stack_depot_save_flags+0x172/0x870 [] Call Trace: [] <TASK> [] fast_req_track+0x58/0xb0 [xe] (cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) | ||||
| CVE-2025-68328 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix bug in saving controller data Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They both are of the same data and overrides each other. This resulted in the rmmod of the svc driver to fail and throw a kernel panic for kthread_stop and fifo free. | ||||
| CVE-2023-54154 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix target_cmd_counter leak The target_cmd_counter struct allocated via target_alloc_cmd_counter() is never freed, resulting in leaks across various transport types, e.g.: unreferenced object 0xffff88801f920120 (size 96): comm "sh", pid 102, jiffies 4294892535 (age 713.412s) hex dump (first 32 bytes): 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8....... backtrace: [<00000000e58a6252>] kmalloc_trace+0x11/0x20 [<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod] [<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod] [<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop] [<000000006a80e021>] configfs_write_iter+0xb1/0x120 [<00000000e9f4d860>] vfs_write+0x2e4/0x3c0 [<000000008143433b>] ksys_write+0x80/0xb0 [<00000000a7df29b2>] do_syscall_64+0x42/0x90 [<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Free the structure alongside the corresponding iscsit_conn / se_sess parent. | ||||
| CVE-2022-50742 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible refcount leak in afu_ioctl() eventfd_ctx_put need to be called to put the refcount that gotten by eventfd_ctx_fdget when ocxl_irq_set_handler fails. | ||||
| CVE-2022-50741 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Disable useless interrupt to avoid kernel panic There is a hardware bug that the interrupt STMBUF_HALF may be triggered after or when disable interrupt. It may led to unexpected kernel panic. And interrupt STMBUF_HALF and STMBUF_RTND have no other effect. So disable them and the unused interrupts. meanwhile clear the interrupt status when disable interrupt. | ||||
| CVE-2022-50818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). | ||||
| CVE-2023-54134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk | ||||
| CVE-2023-54032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race when deleting quota root from the dirty cow roots list When disabling quotas we are deleting the quota root from the list fs_info->dirty_cowonly_roots without taking the lock that protects it, which is struct btrfs_fs_info::trans_lock. This unsynchronized list manipulation may cause chaos if there's another concurrent manipulation of this list, such as when adding a root to it with ctree.c:add_root_to_dirty_list(). This can result in all sorts of weird failures caused by a race, such as the following crash: [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.279928] Code: 85 38 06 00 (...) [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206 [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000 [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070 [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600 [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48 [337571.281723] FS: 00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000 [337571.281950] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0 [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [337571.282874] Call Trace: [337571.283101] <TASK> [337571.283327] ? __die_body+0x1b/0x60 [337571.283570] ? die_addr+0x39/0x60 [337571.283796] ? exc_general_protection+0x22e/0x430 [337571.284022] ? asm_exc_general_protection+0x22/0x30 [337571.284251] ? commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.284531] btrfs_commit_transaction+0x42e/0xf90 [btrfs] [337571.284803] ? _raw_spin_unlock+0x15/0x30 [337571.285031] ? release_extent_buffer+0x103/0x130 [btrfs] [337571.285305] reset_balance_state+0x152/0x1b0 [btrfs] [337571.285578] btrfs_balance+0xa50/0x11e0 [btrfs] [337571.285864] ? __kmem_cache_alloc_node+0x14a/0x410 [337571.286086] btrfs_ioctl+0x249a/0x3320 [btrfs] [337571.286358] ? mod_objcg_state+0xd2/0x360 [337571.286577] ? refill_obj_stock+0xb0/0x160 [337571.286798] ? seq_release+0x25/0x30 [337571.287016] ? __rseq_handle_notify_resume+0x3ba/0x4b0 [337571.287235] ? percpu_counter_add_batch+0x2e/0xa0 [337571.287455] ? __x64_sys_ioctl+0x88/0xc0 [337571.287675] __x64_sys_ioctl+0x88/0xc0 [337571.287901] do_syscall_64+0x38/0x90 [337571.288126] entry_SYSCALL_64_after_hwframe+0x72/0xdc [337571.288352] RIP: 0033:0x7f478aaffe9b So fix this by locking struct btrfs_fs_info::trans_lock before deleting the quota root from that list. | ||||
| CVE-2023-54155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). | ||||
| CVE-2025-68244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x16 ---truncated--- | ||||
| CVE-2023-54015 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. | ||||
| CVE-2022-50738 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix an iotlb memory leak Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during release to free all the resources allocated when processing user IOTLB messages through vhost_vdpa_process_iotlb_update(). That commit changed the handling of IOTLB a bit, and we accidentally removed some code called during the release. We partially fixed this with commit 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release") but a potential memory leak is still there as showed by kmemleak if the application does not send VHOST_IOTLB_INVALIDATE or crashes: unreferenced object 0xffff888007fbaa30 (size 16): comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s) hex dump (first 16 bytes): 40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00 @sA............. backtrace: [<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0 [<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa] [<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost] [<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa] [<00000000de1cd4a0>] vfs_write+0x216/0x4b0 [<00000000a2850200>] ksys_write+0x71/0xf0 [<00000000de8e720b>] __x64_sys_write+0x19/0x20 [<0000000018b12cbb>] do_syscall_64+0x3f/0x90 [<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup() since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap(). vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap() on the whole range removes all the entries. The kmemleak log reported was observed with a vDPA device that has `use_va` set to true (e.g. VDUSE). This patch has been tested with both types of devices. | ||||
| CVE-2023-54017 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: fix possible memory leak in ibmebus_bus_init() If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). | ||||