Export limit exceeded: 26198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26198 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63815 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: bound i_inline_xattr_size for non-inline-xattr inodes When the flexible_inline_xattr feature is enabled, do_read_inode() loads the on-disk i_inline_xattr_size unconditionally: if (f2fs_sb_has_flexible_inline_xattr(sbi)) fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size); but sanity_check_inode() only range-checks it when the inode also has the FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline data but not FI_INLINE_XATTR -- the normal layout for an inline directory -- therefore keeps a fully attacker-controlled i_inline_xattr_size from a crafted image. get_inline_xattr_addrs() returns that value with no flag gating, so it feeds the inode geometry: MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1) NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...) addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY() negative, so make_dentry_ptr_inline() sets d->max (int) to a negative value. The inline directory walk then compares an unsigned long bit_pos against that negative d->max, which is promoted to a huge unsigned bound, and reads far past the inline area: while (bit_pos < d->max) /* fs/f2fs/dir.c */ ... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ... Mounting a crafted image and reading such a directory triggers an out-of-bounds read in f2fs_fill_dentries(); the same underflow also corrupts ADDRS_PER_INODE for regular files. Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the flexible_inline_xattr feature is enabled -- i.e. whenever the value is loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE bound gated on inodes that actually carry an inline xattr, so legitimate inodes with i_inline_xattr_size == 0 are still accepted. | ||||
| CVE-2026-63803 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a .detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a .detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown. Initialize the per-protocol timers in ppp_ioctl() when the protocol is attached, and remove the now-redundant timer_setup() from ppp_start(), so that the timers are initialized exactly once at attach time and ppp_timer_release() never operates on uninitialized timer_list structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so struct ppp's protos[i].timer is uninitialized garbage until the first timer_setup(); without this init-at-attach, attaching the PPP protocol without ever bringing the device up would leave timer_shutdown_sync() operating on uninitialized memory in .detach. Moving the init out of ppp_start() (which only runs on NETDEV_UP) into the attach path makes the initialization unconditional and avoids initializing the same timer_list twice. This bug was found by static analysis. | ||||
| CVE-2026-63797 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL. | ||||
| CVE-2026-53390 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read in smb_check_perm_dacl() The permission-check ACE walk in smb_check_perm_dacl() validates the ACE header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it never checks that ace->size is actually large enough to contain num_subauth sub-authorities before compare_sids() dereferences them. CIFS_SID_BASE_SIZE covers the SID header up to but excluding the sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header, so the existing guards only guarantee the 8-byte SID base, i.e. zero sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for i < min(local_sid->num_subauth, ace->sid.num_subauth). The local comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid() result) always have at least one sub-authority, and an attacker controls the ACE revision and authority bytes (which lie within the in-bounds SID base), so they can match one of those SIDs and force the sub_auth read. A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of the security descriptor therefore causes a heap out-of-bounds read of up to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr() into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in ndr_decode_v4_ntacl()), so the read lands past the allocation. The malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL is not normalised before being written to the security.NTACL xattr) and the read fires on a subsequent SMB2_CREATE access check, making this reachable by an authenticated client on a share that uses ACL xattrs. Add the missing num_subauth-versus-ace_size check, mirroring the identical guards already present in the sibling parsers parse_dacl() and smb_inherit_dacl(). | ||||
| CVE-2026-53332 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. | ||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | ||||
| CVE-2026-31610 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc The kernel ASN.1 BER decoder calls action callbacks incrementally as it walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken [2] OCTET STRING element, ksmbd_neg_token_alloc() allocates conn->mechToken immediately via kmemdup_nul(). If a later element in the same blob is malformed, then the decoder will return nonzero after the allocation is already live. This could happen if mechListMIC [3] overrunse the enclosing SEQUENCE. decode_negotiation_token() then sets conn->use_spnego = false because both the negTokenInit and negTokenTarg grammars failed. The cleanup at the bottom of smb2_sess_setup() is gated on use_spnego: if (conn->use_spnego && conn->mechToken) { kfree(conn->mechToken); conn->mechToken = NULL; } so the kfree is skipped, causing the mechToken to never be freed. This codepath is reachable pre-authentication, so untrusted clients can cause slow memory leaks on a server without even being properly authenticated. Fix this up by not checking check for use_spnego, as it's not required, so the memory will always be properly freed. At the same time, always free the memory in ksmbd_conn_free() incase some other failure path forgot to free it. | ||||
| CVE-2026-23451 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: prevent potential infinite loop in bond_header_parse() bond_header_parse() can loop if a stack of two bonding devices is setup, because skb->dev always points to the hierarchy top. Add new "const struct net_device *dev" parameter to (struct header_ops)->parse() method to make sure the recursion is bounded, and that the final leaf parse method is called. | ||||
| CVE-2025-39936 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked() When 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") moved the error messages dumping so that they don't need to be issued by the callers, it missed the case where __sev_firmware_shutdown() calls __sev_platform_shutdown_locked() with a NULL argument which leads to a NULL ptr deref on the shutdown path, during suspend to disk: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022 RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp] That rIP is: 00000000000006fd <__sev_platform_shutdown_locked.cold>: 6fd: 8b 13 mov (%rbx),%edx 6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi 703: 89 c1 mov %eax,%ecx Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e RSP: 0018:ffffc90005467d00 EFLAGS: 00010282 RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ and %rbx is nice and clean. Call Trace: <TASK> __sev_firmware_shutdown.isra.0 sev_dev_destroy psp_dev_destroy sp_destroy pci_device_shutdown device_shutdown kernel_power_off hibernate.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Pass in a pointer to the function-local error var in the caller. With that addressed, suspending the ccp shows the error properly at least: ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110 SEV-SNP: Leaking PFN range 0x146800-0x146a00 SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00] ... ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0 ACPI: PM: Preparing to enter system sleep state S5 kvm: exiting hardware virtualization reboot: Power down Btw, this driver is crying to be cleaned up to pass in a proper I/O struct which can be used to store information between the different functions, otherwise stuff like that will happen in the future again. | ||||
| CVE-2025-39729 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix dereferencing uninitialized error pointer Fix below smatch warnings: drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked() error: we previously assumed 'error' could be null | ||||
| CVE-2025-38550 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Delay put pmc->idev in mld_del_delrec() pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec() does, the reference should be put after ip6_mc_clear_src() return. | ||||
| CVE-2024-27390 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down() As discussed in the past (commit 2d3916f31891 ("ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()")) I think the synchronize_net() call in ipv6_mc_down() is not needed. Under load, synchronize_net() can last between 200 usec and 5 ms. KASAN seems to agree as well. | ||||
| CVE-2023-52494 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Add alignment check for event ring read pointer Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption. So add a alignment check for event ring read pointer. | ||||
| CVE-2026-13446 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-23 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. | ||||
| CVE-2026-7667 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-23 | 8.8 High |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to create a malicious flow pointing to an attacker-controlled URL that returns a specially crafted Content-Disposition header (e.g., filename="../../../target/path" ), enabling arbitrary file write operations with attacker-controlled content to any path accessible by the Langflow process. | ||||
| CVE-2026-47304 | 3 Apple, Linux, Microsoft | 22 Macos, Linux Kernel, .net and 19 more | 2026-07-22 | 8.1 High |
| Improper verification of cryptographic signature in .NET allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2023-3390 | 3 Linux, Netapp, Redhat | 12 Linux Kernel, H300s, H410c and 9 more | 2026-07-22 | 7.8 High |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 | ||||
| CVE-2026-63882 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) | ||||
| CVE-2023-3640 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | 7 High |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. | ||||
| CVE-2026-7754 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-21 | 7.7 High |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism. | ||||