Export limit exceeded: 408716 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408716 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93104 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure. | ||||
| CVE-2026-93099 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix UAF from worker threads when domains are removed The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters and may sleep while doing so. They are scheduled via delayed_work embedded in struct rdt_l3_mon_domain. Architecture allocates and frees these domains from CPU hotplug callbacks under cpus_write_lock(), and the workers acquire cpus_read_lock() to keep the domain alive across their access. A use-after-free can occur when a worker is blocked waiting for cpus_read_lock() while the hotplug core holds cpus_write_lock(): the architecture frees the rdt_l3_mon_domain that contains the worker's work_struct. When the worker unblocks, the container_of() it performs on the embedded work pointer dereferences freed memory. Drop cpus_read_lock() from the workers and instead drain pending and in-flight work synchronously before the architecture can free the domain. Since architecture offlines the domain under cpus_write_lock() after it has been unlinked from the RCU list and a grace period has elapsed, no new work can be scheduled. The cancel only needs to wait out existing work. Drop rdtgroup_mutex during CPU offline around cancel_delayed_work_sync() so that a worker waiting on the mutex can complete before re-pinning the work on a different CPU. When offlining a CPU the architecture may iterate over resources in any order. For example, the MBA control domain may be offlined before or after a corresponding L3 monitor domain. Ensure that resctrl fs cancels the workers no matter what order the architecture offlines the domains. | ||||
| CVE-2026-93096 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Serialize multi-part Get/Set Feature transfers A Get or Set Feature payload larger than the mailbox payload size is split into several mailbox commands. mbox_mutex only serializes individual mailbox commands and is dropped between iterations of these loops. Nothing serializes the multi-part transfer as a whole. cxl_get_feature() and cxl_set_feature() are reachable concurrently from fwctl (per-fd RPCs run under a read-held registration lock) and from the EDAC scrub/ECS/repair paths, so two transfers to the same mailbox can interleave their parts and corrupt the device's transfer context. Add a per-mailbox feat_mutex and hold it across the whole transfer in both functions. It nests outside mbox_mutex (which is taken inside cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering inversion is introduced. | ||||
| CVE-2026-93081 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again. | ||||
| CVE-2026-92503 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find() Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising concurrent xattr workloads (using the ea_inode mount/format option). The deadlock occurs between the running transaction and the eviction thread: - Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce) and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve the corresponding EA inode. Since the EA inode is currently being evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for eviction to complete. - Task 2 (eviction thread): Currently evicting the same EA inode in ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which blocks waiting for Task 1 to release the reference to the mbcache_entry. To break this deadlock, implement a new ext4_iget() configuration flag named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the inode via VFS's find_inode_nowait() API. If the inode is currently being evicted (marked with I_FREEING or I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS inode cache (cache miss), simply skip it (returning -ENOENT) rather than waiting for eviction/creation to complete, breaking the ABBA cycle. Since we return -ENOENT immediately on a cache miss, we never attempt to allocate a new inode or call iget_locked(), completely eliminating any TOCTOU race window. If the returned inode is I_NEW, wait for its initialization to clear via wait_on_new_inode(). If initialization fails and the inode is unhashed during wait_on_new_inode() waking up (e.g., due to an I/O read error in another thread), safely drop the reference and return -ENOENT. This unhashed check is executed unconditionally on all cache-hit pathways to properly handle concurrent initialization failures. Finally, standard validation checks (including is_bad_inode, EXT4_EA_INODE_FL, file_acl, and xattr flags) are executed as normal inside check_igot_inode() to fully guarantee VFS-layer safety. In ext4_xattr_inode_cache_find(), invoke ext4_iget() with the new EXT4_IGET_NOWAIT flag to perform the non-blocking cache search. | ||||
| CVE-2026-92485 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock. | ||||
| CVE-2026-92482 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated with device-managed memory but registered with the non-managed gpiochip_add_data(). This was harmless while the drivers were built-in, but once they can be built as modules and unbound/rmmod'd, devm frees the gpio_chip's memory while it is still registered, causing a use-after-free. Register it with devm_gpiochip_add_data() so it shares the same device-managed lifecycle, which also lets the manual gpiochip_remove() error paths go away. | ||||
| CVE-2026-92480 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread. | ||||
| CVE-2026-92429 | 2026-10-15 | 5.3 Medium | ||
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including marking unpaid orders as paid and cancelling completed orders. | ||||
| CVE-2026-92428 | 2026-10-15 | 5.3 Medium | ||
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including orders that were already paid or completed. | ||||
| CVE-2026-92426 | 2026-10-15 | 4.9 Medium | ||
| The YITH WooCommerce Popup WordPress plugin before 1.60.0 does not check the capability of the requesting user before deleting post meta, allowing users with the Contributor role and above to delete arbitrary post meta from any post, including content owned by higher-privileged users. | ||||
| CVE-2026-92409 | 2026-10-15 | 6.8 Medium | ||
| The Donation Thermometer WordPress plugin before 2.3.0 does not escape a colour value taken from a shortcode attribute before using it in an attribute of the generated legend markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when the page is viewed. | ||||
| CVE-2026-92392 | 1 Redhat | 1 Hummingbird | 2026-10-15 | 8.1 High |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server (with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after free of a `struct Curl_easy` object. | ||||
| CVE-2026-91076 | 2026-10-15 | 5.3 Medium | ||
| The Robokassa payment gateway for Woocommerce WordPress plugin before 1.9.0 does not verify the authenticity of an incoming payment-notification request before acting on the order named in it, allowing unauthenticated attackers to force any WooCommerce order into a failed state. Order identifiers are sequential, so every order in the shop can be taken out of the fulfilment queue one request at a time. | ||||
| CVE-2026-90989 | 2026-10-15 | 4.3 Medium | ||
| The Tainacan WordPress plugin before 1.4.0 does not restrict its reports REST endpoints to users with a management capability, allowing any authenticated subscriber to read the email addresses of the repository's staff. | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90421 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90412 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix return status of RMI log page on allocation failure nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS (set by the successful nvmet_req_find_ns() call) when the kzalloc() for the log buffer fails. It then jumps to the out label and completes the request with a success status, so the host is told the command succeeded while no data was transferred. Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler, so an allocation failure is reported as an internal error. | ||||
| CVE-2026-90409 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Add vm_bind region with kbo range overlap check When a VM is created, caller has to specify the range of the address space carve-out set aside for mapping kernel BO's. That means vm_bind mappings of UM-exposed BO's should not intersect with that region, but at the moment we're not checking this. At first, I thought of giving these values to drm_gpuvm_init() through its reserve_{offset, range} arguments, but it turns out that is meant for VM address spans that are not managed through the usual drm_gpuvm split/merge circuit, so storing the end of the user VA range at VM creation time and doing a quick check in the vm_bind ioctl path was the simplest workaround. The new check also makes sure vm_bind range doesn't overflow the size of a 64-bit unsigned integer. That was already being done further down the call stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to fail early in the driver before GPUVM functions are invoked so that we won't waste time allocating vm_bind context resources. | ||||