Export limit exceeded: 24352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24352 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90413 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build. | ||||
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90403 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path. | ||||
| CVE-2026-90402 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix controller cleanup on EDL sysfs failure mhi_register_controller() adds the controller device before creating the optional trigger_edl sysfs file. If sysfs_create_file() fails, the error path only drops the device reference and leaves the device registered. Hence, call device_del() in the error path before put_device(). | ||||
| CVE-2026-90401 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90392 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields. | ||||
| CVE-2026-90388 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Check atomic pool allocation result directly The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(), which returns the allocated page and fills cpu_addr only on success. Do not rely on cpu_addr to detect allocation failure in this path. Check the returned page directly before using it for the IOMMU mapping. | ||||
| CVE-2026-90387 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to dma_free_from_pool(), which will fail to recognize the chunk Pass the virtual address returned by the allocation path into swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This keeps the pool free path using the same virtual address as the allocator. | ||||
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-90372 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss If a peer's VHT/HE MCS map has no supported spatial stream (all fields 0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255), which was then written into the firmware sta_rec_bf beamforming fields. Clamp the result to 0. | ||||
| CVE-2026-90371 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RXDMAD_C buffer recycling race The RXDMAD_C buffers come from the RRO data queues' page pools, which are bound to a different NAPI, so the direct page-pool recycle used here could race the owning NAPI; take the non-direct path as is already done for WED RX queues. | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90358 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix trampoline stack size for 128-bit arguments btf_distill_func_proto() accepts a function argument up to 16 bytes, so a 128-bit scalar such as __int128 reaches the x86 trampoline with arg_size == 16. But the current implementation assumes an __int128 argument only needs one register, so the register save area is under-allocated and save_args() overwrites adjacent stack slots. Compute the register count from arg_size for all arguments to fix it. | ||||
| CVE-2026-90357 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement The flow is added to dev->twt_list before sending the agreement to the firmware, but the error path leaves it linked while flowid_mask is never set. The flow slot can then be reused and memset while still on the list, corrupting twt_list, and station removal leaves a dangling entry behind that mt7915_mac_twt_sched_list_add() later walks. | ||||