Export limit exceeded: 25229 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25229 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98208 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdio_uart: fix xmit_fifo leak when the port table is full sdio_uart_add_port() allocates the transmit fifo before claiming a slot in sdio_uart_table[]. When all UART_NR slots are taken, it returns -EBUSY with the fifo still allocated, but the probe error path only kfree()s the port, leaking the transmit fifo. Free the fifo in the failure path of sdio_uart_add_port() itself so the function retains nothing on error. | ||||
| CVE-2026-98210 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registered IRQ, then cancel datawork and delete the watchdog in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first keeps a trailing handler from re-arming datawork between the cancel and the host free. Both callbacks are non-self-rearming. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98303 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward output route cannot be used in icmp_route_lookup(), it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr, the original packet's source address. ip_route_input() only returns an error for truly invalid packets. For unreachable addresses it will succeed and return an input route whose dst.output is set to ip_rt_bug(). The existing check only rejects RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned and later used for output, syzkaller triggering a WARN_ON_ONCE() in ip_rt_bug() as bellow: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_push_pending_frames+0xfa/0x100 __icmp_send+0x905/0xf10 ip_options_compile+0xc0/0xd0 ip_rcv_finish_core+0x321/0xae0 ip_rcv+0x1de/0x260 __netif_receive_skb_one_core+0x11a/0x130 netif_receive_skb+0x7b/0x260 tun_get_user+0x11bf/0x1c10 ------------[ cut here ]------------ Reject input route that is RTN_UNREACHABLE to fix it. The net warning is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of a race condition. | ||||
| CVE-2026-98374 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack() When tcp_send_synack() replaces the cloned SYN skb at the head of the retransmit queue with a copy, it frees the original with tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack. tp->retransmit_skb_hint keeps pointing at the freed skbuff_fclone_cache object. The dangling hint is read in tcp_verify_retransmit_hint() and used as the root of the rbtree walk in tcp_xmit_retransmit_queue(). An unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with an attacker-supplied ICMP fragmentation-needed message, after which a simultaneous open frees the armed SYN skb: BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) Read of size 4 at addr ffff88800604d928 by task swapper/1/0 Call Trace: tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) tcp_simple_retransmit (net/ipv4/tcp_input.c:3158) tcp_v4_err (net/ipv4/tcp_ipv4.c:587) Sync the hint to the copy. | ||||
| CVE-2026-98201 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy. | ||||
| CVE-2026-98211 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98212 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98214 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hook. During mprotect(), recheck fd { use } and the requested inode permissions for every saved mounter, and include the intermediate layers in the execmod checks. Policy for nested stacking may then need to grant intermediate mounters what a direct mmap() already requires, and execmod on intermediate labels for binaries using text relocations. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy, on a mainline tree containing commit f2381b546e7e ("fs: fix user path of nested backing files"). [PM: subject tweak] | ||||
| CVE-2026-98219 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishes ops->priv before scx_root_enable_workfn() switches the state to SCX_ENABLING. An error claimed via scx_bpf_error_bstr() from an associated BPF program in that window is consumed by scx_disable_workfn(), which takes the pre-enable shortcut in scx_root_disable(). The shortcut returns without any teardown and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg racing the enable workfn's own transition. The enable then completes with the claim consumed: the scheduler stays up but can never be disabled again, and bpf_scx_unreg() frees it while still in use, resulting in a use-after-free. Both WARN_ON_ONCE()s fire back to back: WARNING: kernel/sched/ext/ext.c:7522 at scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276 WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8, CPU#0: sched_ext_helpe/664 scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler allocation, so ops->priv is never visible while SCX_DISABLED. The allocation failure path restores SCX_DISABLED. | ||||
| CVE-2026-98224 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for relevant mappings via: security_vm_enough_memory_mm() -> __vm_enough_memory() -> vm_acct_memory() If __mmap_setup() fails, this indicates that this accounting did not take place, and thus it's appropriate for __mmap_region() to jump to abort_munmap. However if call_mmap_prepare() fails, it also jumps there and any accounted memory is not correctly unaccounted. Fix this by handling each error separately. | ||||
| CVE-2026-98234 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge hh_flows_limit lets each new heavy-hitter flow pass the hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory growth. Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the hhf_init() default) and report the rejected value via extack. The deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on TCA_OPTIONS. Configs relying on hh_limit above the default were relying on unbounded, unsafe behaviour and are not supported going forward. hhf_init() also ran hhf_change() before setting the default hh_flows_limit, so a user-supplied hh_limit at add time was clobbered back to 2048. Set the default before hhf_change() so the configured value sticks. This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp quantum in change and init paths"), which bounded the quantum of the same qdisc; the hh_flows_limit bound is the remaining unbounded knob of that series' scope. Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace; tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the value is echoed by tc qdisc show, unbounding heavy-hitter flow allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048 instead of 500. | ||||
| CVE-2026-98253 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Serialize join and leave on copy_to_user failure rdma_join_multicast() queues RoCE work that later reads the ucma_multicast through event->param.ud.private_data, then list_add()s the CMA multicast at the head of id_priv->mc_list. rdma_leave_multicast() matches only by sockaddr and destroys the first hit. ucma_process_join() used to drop ctx->mutex after a successful join and retake it only if copy_to_user() failed. Two concurrent JOIN_MCAST calls with the same address can therefore insert a second CMA entry before the first thread's leave. leave then cancels the newer work and the older worker still dereferences the ucma_multicast that the first thread frees. Keep ctx->mutex held from rdma_join_multicast() through copy_to_user() and, on -EFAULT, through rdma_leave_multicast() so leave cannot miss this join. Do not leave if join itself failed: that path never published this address on mc_list, and a leave-by-addr would destroy an earlier successful join. | ||||
| CVE-2026-102490 | 3 Docker, Linux, Zammad | 3 Docker, Linux Kernel, Zammad | 2026-10-09 | 7.8 High |
| Zammad packages built with packager.io (DEB and RPM) could have allowed a local attacker who already had file system write privileges as the unprivileged zammad service account to escalate to full root privileges on the host. Service processes began running as root and executed files that were owned and writable by the zammad account before dropping their identity to that account. An attacker holding that foothold could have escalated within seconds, because the affected services were restarted automatically whenever they stopped; no administrator interaction was required. Only installations from the DEB and RPM packages were affected — installations from source or the official container images were not. All released packaged versions were affected. | ||||
| CVE-2026-98379 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rpfilter: reject routes without inet6_dev ip6_route_lookup() can return an error-free route whose rt6i_idev is NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects in the FIB. An unprivileged user can construct this state with rtnetlink in a private user and network namespace, then trigger a NULL dereference through an IPv6 rpfilter lookup: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: rpfilter_mt (net/ipv6/netfilter/ip6t_rpfilter.c:75) Call Trace: ip6t_do_table (net/ipv6/netfilter/ip6_tables.c:316) nf_hook_slow (net/netfilter/core.c:619) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6216) process_backlog (net/core/dev.c:6680) __napi_poll (net/core/dev.c:7739) net_rx_action (net/core/dev.c:7959) handle_softirqs (kernel/softirq.c:622) do_softirq.part.0 (kernel/softirq.c:523) __local_bh_enable_ip (kernel/softirq.c:450) __dev_queue_xmit (net/core/dev.c:4913) packet_sendmsg (net/packet/af_packet.c:3139) __sys_sendto (net/socket.c:2252) __x64_sys_sendto (net/socket.c:2259) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Reject routes without an inet6_dev immediately after lookup. Such routes are not eligible for reverse-path filtering, and the check protects all later rt6i_idev dereferences. | ||||
| CVE-2026-98368 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: esp: downgrade zerocopy managed frags before mutating skb frags On the out-of-place output path (esp->inplace == false) ESP rewrites the skb frag array: esp_output_head() appends a trailer frag and esp_output_tail() replaces the frags with a destination page, both referenced with get_page(). When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the payload frags are owned by the ubuf and must not be referenced or unreferenced individually, but ESP mutates the frag array without ever downgrading the skb. This breaks the managed-frag invariant two ways: - esp_ssg_unref() walks the source scatterlist and drops a page reference for every frag, including the ubuf-owned payload frags, pushing their refcount below the GUP pin bias while the pages are still pinned, i.e. a use-after-free of the zerocopy pages; - esp_output_tail() installs its destination page as frag 0 with get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so skb_release_data() takes the skip_unref branch and never drops that reference, leaking the x->xfrag page at packet rate. Fix this the way every other frag-mutating site does (__ip_append_data(), __ip6_append_data(), tcp_sendmsg_locked()) and call skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS, so the per-frag unref in esp_ssg_unref() and the frag release in skb_release_data() are both balanced and no mixed-ownership frag array is left behind. | ||||
| CVE-2026-98195 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: fix broadcast stations deallocation On the error path of __il4965_up(), il_dealloc_bcast_stations() clears only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the same broadcast stations to be deallocated again by __il4965_down(). This can occur when RF_KILL is toggled during driver startup. To fix clear the entire 'used' field, since we will not do any other operations on the station. | ||||
| CVE-2026-98192 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(), which only dequeues the timer and does not wait for a callback that is already executing; the preceding free_irq() calls synchronize the interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can therefore be running past the teardown and use the wcn freed along with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock, reads wcn->tx_ack_skb and passes wcn->hw to ieee80211_tx_status_irqsafe(). Fix this by using timer_shutdown_sync(), which waits for a running callback and also prevents the timer from being rearmed again. The timer is set up again by wcn36xx_dxe_init() on the next start, so the start/stop cycle is unaffected. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98197 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe() creates the w83791d_group_fanpwm45 sysfs group on the I2C client device. The probe error path removes this group when a later initialization step fails, but the normal remove path only removes w83791d_group. As a result, the optional fan/pwm 4-5 sysfs files can remain after the driver is unbound. The callbacks associated with these files access the driver data, which is devm allocated and released after driver unbind. Leaving the sysfs files behind can therefore result in accesses to stale driver data. Remove w83791d_group_fanpwm45 during normal teardown as well. This issue was found by manual code inspection. | ||||
| CVE-2026-98366 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then validates the IB_MR_REREG_ACCESS argument: if (flags & IB_MR_REREG_PD) { rxe_put(old_pd); rxe_get(pd); mr->ibmr.pd = ibpd; } if (flags & IB_MR_REREG_ACCESS) { if (access & ~RXE_ACCESS_SUPPORTED_MR) return ERR_PTR(-EOPNOTSUPP); mr->access = access; } Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access check with mr->ibmr.pd already reassigned. mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error without undoing the reassignment, so mr->pd == new_pd while the usecnts still charge the MR to orig_pd. ib_dereg_mr_user() then decrements new_pd, whose count can reach zero while a memory window still references it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup() writes to freed memory: BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0 Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591 __rxe_put+0x31/0xa0 rxe_mw_cleanup+0x42/0x200 __rxe_cleanup+0x115/0x370 rxe_dealloc_mw+0x4c/0x80 Allocated by task 591: ib_uverbs_alloc_pd+0x258/0x540 Freed by task 591: ib_dealloc_pd_user+0x174/0x210 uverbs_free_pd+0x8d/0xc0 ib_uverbs_dealloc_pd+0x18e/0x1d0 Validate the access flags before mutating any state so the callback either applies every requested change or none. | ||||
| CVE-2026-98184 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticate() derives the authentication frame length from req->ie_len and req->auth_data_len, both of type size_t, but stores it in a u16. NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is a u16, a single attribute can carry up to 65531 bytes of payload, so the sum can exceed U16_MAX before it is assigned to pkt_len. The truncated pkt_len determines the skb frame area, while the copy length remains req->auth_data_len - 4, resulting in a heap buffer overflow. For example, with auth_data_len equal to 65510 and no IEs, the sum is 65546. It is truncated to 10 and then reduced by four to 6. The driver appends only six bytes to the skb with skb_put(), but then copies 65506 user-provided bytes into the authentication body. Reaching this path requires CAP_NET_ADMIN in the user namespace owning the network namespace, an up station netdev, and a suitable BSS/SAE authentication request. Compute the length in size_t, reject values that cannot be represented by the firmware's u16 frame length field, and only then assign it to pkt_len. | ||||