Export limit exceeded: 383050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (383050 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74689 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems. | ||||
| CVE-2026-74708 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate launch-time metadata size Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that. | ||||
| CVE-2026-74690 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. | ||||
| CVE-2026-74702 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | ||||
| CVE-2026-16601 | 2026-08-25 | 8.8 High | ||
| The CM Map Locations – Visualize and share your locations in a few clicks plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 2.1.8 via the uploadMedia function. This is due to insufficient file type validation in the upload handler, which performs incomplete extension filtering without MIME-type checks or upload capability verification before passing attacker-supplied files to move_uploaded_file(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The required nonce is exposed to any logged-in Subscriber via the CMLOC_Editor_Images JavaScript object on the front-end location editor page. | ||||
| CVE-2026-19499 | 2026-08-25 | 6.8 Medium | ||
| A flaw was found in glibc. The strfmon and strfmon_l functions are vulnerable to a buffer overflow when processing right-justified width padding. This occurs because an incorrect length is used for an internal memory operation, causing data to be written beyond its intended buffer. An attacker could exploit this by providing specially crafted input, potentially leading to arbitrary code execution or other severe impacts. | ||||
| CVE-2026-74597 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack. | ||||
| CVE-2026-74641 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74651 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie() rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific information element without checking that the element is long enough, causing an out-of-bounds read for a short trailing IE. The function locates a vendor-specific IE (EID 221) with rtw_get_ie() and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte version word at pbuf + 6. Those accesses require the IE body to be at least 6 bytes, but rtw_get_ie() only guarantees that the element fits within the buffer; it does not enforce a minimum body length. A vendor-specific IE whose length byte is 0 to 5, placed at the end of the buffer, therefore makes these reads run past the end of the IE and past the end of the buffer itself. The buffer holds information elements taken from received management frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which is kmemdup'd to its exact length, so the read can run off the end of the allocation. The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and rtw_get_wps_ie() in this file already reject too-short vendor-specific IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in line with them, and needs a minimum of 6 rather than 4 bytes because of the version word. Add the missing length check. | ||||
| CVE-2026-74621 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packet, unbounded. Note the drop counter is already incremented for these errors, so the statistics claim a drop that never happens. Three different ownership states reach out_frag: today - the skb may be queued by the defrag engine (-EINPROGRESS), already freed by nf_ct_handle_fragments(), or still owned by us. Tell the caller which of those it is, and free the packet ourselves in the last case, which restores the TC_ACT_SHOT behaviour that predated the Fixes: commit. Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6 header with nexthdr = 0 (hop-by-hop) and nothing after it, on a clsact ingress chain with "action ct". kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet; with this patch it reports none. | ||||
| CVE-2026-19542 | 2026-08-25 | 4.2 Medium | ||
| A flaw was found in glibc. An out-of-bounds array write vulnerability exists within the `tdelete` function. This issue occurs due to incorrect management of array sizes, which can lead to memory corruption. A local attacker with low privileges could potentially exploit this to cause a denial of service or disclose sensitive information. | ||||
| CVE-2026-74615 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74603 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan. | ||||
| CVE-2026-56702 | 2 Adminer, Vrana | 2 Adminer, Adminer | 2026-08-25 | 8.8 High |
| Adminer versions before 5.4.3 contain an unrestricted file upload vulnerability in the AdminerFileUpload plugin that allows authenticated users to upload PHP files by exploiting a permissive default extension allowlist. Attackers can upload PHP webshells to columns ending in _path and execute arbitrary code as the web-server user when uploadPath is web-served. | ||||
| CVE-2026-74676 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vt: add permission check for KDSKBMETA ioctl KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process to change meta mode on a non-controlling console without authorization. | ||||
| CVE-2025-41741 | 2026-08-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-74730 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Pin the 'struct nfs_server' during a FREE_STATEID call Dan Aloni reports that he was able to hit a use-after-free bug if a FREE_STATEID operation gets delayed for whatever reason. Fix this by bumping the refcount of the 'struct nfs_server' object for the duration of the FREE_STATEID so it doesn't get cleaned up from underneath us while operations are still in flight. | ||||
| CVE-2026-74717 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, return NULL on create error Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- | ||||
| CVE-2026-74714 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch() reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto the ehash chain, drops the bucket lock, and only afterwards sets rsk_refcnt to 3. Lockless readers such as __inet_lookup_established() handle this with refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain sock_hold() while holding the bucket lock, on the assumption that the lock guarantees sk_refcnt > 0. That assumption does not hold for request_sock: CPU 0 CPU 1 ----- ----- tcp_conn_request() reqsk_queue_hash_req() inet_ehash_insert(req) spin_lock(bucket) __sk_nulls_add_node_rcu(req) // rsk_refcnt == 0 spin_unlock(bucket) bpf_iter_tcp_established_batch() spin_lock(bucket) sock_hold(req) <-- addition on 0 spin_unlock(bucket) refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value which surfaces as: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1 Call Trace: bpf_iter_tcp_established_batch+0x14e/0x170 bpf_iter_tcp_batch+0x53/0x200 bpf_iter_tcp_seq_next+0x27/0x70 bpf_seq_read+0x107/0x410 vfs_read+0xb9/0x380 The iterator's stolen reference is lost when the publishing CPU's refcount_set() overwrites the count, leaving the socket one reference short. When the last legitimate owner drops its reference the reqsk is freed while still reachable, leading to use-after-free. This reproduces in seconds with tcp_syncookies=0, a handful of threads doing connect()/close() to a local listener while others read an iter/tcp link in a tight loop. Use refcount_inc_not_zero() and skip the socket on failure. A skipped socket is still part of the bucket, so keep counting it in expected. The reallocations are sized from expected, and a request sock whose refcount gets published while the lock is held across the last realloc must already have room. A skipped socket is counted in expected but never batched, so end_sk can be short of expected on a batch that is actually complete. Decide completeness by whether the walk left any socket behind instead. The WARN after the locked realloc checks the same, replacing an end_sk == expected check that could not hold on that path since commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always contains a full bucket snapshot"). If every matching socket in a bucket is mid-init (refcount 0), end_sk stays 0. Advance to the next bucket rather than returning a batch entry that was never filled this round. | ||||
| CVE-2026-74712 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix buffer length in create_direct_keys() We have seen in our CI the following KASAN message: BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core] Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764 [...] [<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core] [<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core] [<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa] [<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa] [...] The buggy address is located 4128 bytes inside of allocated 4384-byte region [0000000176794000, 0000000176795120) So in essence we read 16 bytes beyond 4384-byte allocation. create_direct_keys calculates the pointer and length for in and out buffers. The size calculation for in includes the entire structure size (out + in + mtt[]) but the pointer passed to cmd_exec points only to the 'in' field, skipping the 'out' field. This causes mlx5_copy_to_msg() to read beyond the allocated buffer by sizeof(out) bytes when copying command data. Properly calculate the input size to match the pointer and allocation size. | ||||