Export limit exceeded: 397440 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 42390 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (42390 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46306 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: do not dissect PPPoE PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the flow dissector driver has assumed an uncompressed frame until the blamed commit. During the review process of that commit [1], support for PFC is suggested. However, having a compressed (1-byte) protocol field means the subsequent PPP payload is shifted by one byte, causing 4-byte misalignment for the network header and an unaligned access exception on some architectures. The exception can be reproduced by sending a PPPoE PFC frame to an ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE session is active on that interface: $ 0 : 00000000 80c40000 00000000 85144817 $ 4 : 00000008 00000100 80a75758 81dc9bb8 $ 8 : 00000010 8087ae2c 0000003d 00000000 $12 : 000000e0 00000039 00000000 00000000 $16 : 85043240 80a75758 81dc9bb8 00006488 $20 : 0000002f 00000007 85144810 80a70000 $24 : 81d1bda0 00000000 $28 : 81dc8000 81dc9aa8 00000000 805ead08 Hi : 00009d51 Lo : 2163358a epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50 ra : 805ead08 __skb_get_hash_net+0x74/0x12c Status: 11000403 KERNEL EXL IE Cause : 40800010 (ExcCode 04) BadVA : 85144817 PrId : 0001992f (MIPS 1004Kc) Call Trace: [<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50 [<805ead08>] __skb_get_hash_net+0x74/0x12c [<805ef330>] get_rps_cpu+0x1b8/0x3fc [<805fca70>] netif_receive_skb_list_internal+0x324/0x364 [<805fd120>] napi_complete_done+0x68/0x2a4 [<8058de5c>] mtk_napi_rx+0x228/0xfec [<805fd398>] __napi_poll+0x3c/0x1c4 [<805fd754>] napi_threaded_poll_loop+0x234/0x29c [<805fd848>] napi_threaded_poll+0x8c/0xb0 [<80053544>] kthread+0x104/0x12c [<80002bd8>] ret_from_kernel_thread+0x14/0x1c Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000 To reduce the attack surface and maintain performance, do not process PPPoE PFC frames. [1] https://lore.kernel.org/r/20220630231016.GA392@debian.home | ||||
| CVE-2026-46193 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. | ||||
| CVE-2026-46021 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. | ||||
| CVE-2026-46015 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: call sk_data_ready() after listener migration When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely. Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop(). However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path. The reqsk_timer_handler() path does not need the same changes for two reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly. | ||||
| CVE-2026-43499 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ] | ||||
| CVE-2026-43071 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260 There will be only one bucket in dentry_hashtable when dhash_entries is set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then, following process will access more than one buckets(which memory region is not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB! Fix it by limiting the minimal number of dentry_hashtable bucket to two, so that 'd_hash_shift' won't exceeds the bit width of type u32. | ||||
| CVE-2024-42391 | 1 Cesanta | 1 Mongoose | 2026-09-08 | 4.3 Medium |
| Use of Out-of-range Pointer Offset vulnerability in Cesanta Mongoose Web Server v7.14 allows an attacker to send an unexpected TLS packet and force the application to read unintended heap memory space. | ||||
| CVE-2024-42386 | 1 Cesanta | 1 Mongoose | 2026-09-08 | 8.2 High |
| Use of Out-of-range Pointer Offset vulnerability in Cesanta Mongoose Web Server v7.14 allows an attacker to send an unexpected TLS packet and produce a segmentation fault on the application. | ||||
| CVE-2026-7867 | 1 Redhat | 2 Enterprise Linux, Enterprise Linux Eus | 2026-09-08 | 7.8 High |
| A flaw was found in udisks2. A local attacker with an active console session can exploit insufficient authorization checking on the 'as-user' option in the org.freedesktop.UDisks2.Filesystem.Mount() D-Bus method. This allows the attacker to spoof the 'as-user' parameter, mounting filesystems on behalf of arbitrary users, including privileged accounts. This can lead to local privilege escalation through mount point injection and manipulation of the mount namespace visible to privileged users. | ||||
| CVE-2026-23459 | 1 Linux | 1 Linux Kernel | 2026-09-07 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which call iptunnel_xmit_stats(). iptunnel_xmit_stats() was assuming tunnels were only using NETDEV_PCPU_STAT_TSTATS. @syncp offset in pcpu_sw_netstats and pcpu_dstats is different. 32bit kernels would either have corruptions or freezes if the syncp sequence was overwritten. This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid a potential cache line miss since iptunnel_xmit_stats() needs to read it. | ||||
| CVE-2025-21817 | 1 Linux | 1 Linux Kernel | 2026-09-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: mark GFP_NOIO around sysfs ->store() sysfs ->store is called with queue freezed, meantime we have several ->store() callbacks(update_nr_requests, wbt, scheduler) to allocate memory with GFP_KERNEL which may run into direct reclaim code path, then potential deadlock can be caused. Fix the issue by marking NOIO around sysfs ->store() | ||||
| CVE-2024-8447 | 1 Redhat | 4 Jboss Data Grid, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Xp and 1 more | 2026-09-07 | 5.9 Medium |
| A security issue was discovered in the LRA Coordinator component of Narayana. When Cancel is called in LRA, an execution time of approximately 2 seconds occurs. If Join is called with the same LRA ID within that timeframe, the application may crash or hang indefinitely, leading to a denial of service. | ||||
| CVE-2026-20508 | 1 Mediatek, Inc. | 1 Mediatek Chipset | 2026-09-07 | 6.7 Medium |
| In Power HAL, there is a possible escalation of privilege due to type confusion. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11165543; Issue ID: MSV-9012. | ||||
| CVE-2026-54201 | 1 Tobit Laboratories Ag | 1 Teamdavid | 2026-09-07 | N/A |
| Tobit Laboratories AG TeamDavid's Webbox does not enforce authentication or authorization checks when serving these log files. As a result, attackers can obtain sensitive error information or internal application details, potentially aiding in further attacks. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | ||||
| CVE-2026-85311 | 2026-09-07 | 5.3 Medium | ||
| Missing Authorization vulnerability in Kings Plugins MarketKing allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects MarketKing: from n/a through 2.1.60. | ||||
| CVE-2026-84238 | 2 Wordpress, Yith | 2 Wordpress, Yith Request A Quote For Woocommerce Premium | 2026-09-07 | 9.8 Critical |
| Unauthenticated Broken Access Control in YITH Request a Quote for WooCommerce Premium < 4.46.0 versions. | ||||
| CVE-2026-83628 | 2 Jeff Farthing, Wordpress | 2 Theme My Login, Wordpress | 2026-09-07 | 4.3 Medium |
| The Theme My Login plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 7.1.15 on Multisite installations. This is due to the `tml_ms_signup_handler()` function's `gimmeanotherblog` branch failing to enforce the network's `active_signup` registration policy, checking only `is_user_logged_in()` while sibling branches such as `validate-blog-signup` apply the full policy gate. This makes it possible for authenticated attackers, with Subscriber-level access and above, to directly POST `stage=gimmeanotherblog` to Theme My Login's signup route, bypassing the configured registration policy entirely — even when it is set to `none` or `user` — which causes `wpmu_create_blog()` to execute with the attacker's user ID, after which WordPress core assigns the Administrator role on the newly created subsite via `add_user_to_blog()`. The privilege gain is scoped to the newly created subsite only; the attacker's account retains Subscriber-level access on the main site and does not obtain Super Admin or network-level capabilities such as `manage_network` or `manage_sites`. | ||||
| CVE-2026-75018 | 2 Outlawgt, Wordpress | 2 Custom Contact Forms, Wordpress | 2026-09-07 | 4.3 Medium |
| The Custom Contact Forms plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 7.16. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to permanently force-delete arbitrary posts of any post type (including pages, administrator-authored posts, and WooCommerce products) and write arbitrary ccf_field_* post meta onto any post regardless of ownership or post type. The top-level form ID is checked via edit_post/publish_posts, but the nested fields[].ID and choices[].ID paths processed by _create_and_map_fields() and _create_and_map_choices() carry no equivalent capability or post-type guard, leaving those sinks fully exposed while delete_item() and delete_submission() contain explicit post-type restriction fixes demonstrating the developer's awareness of scoping requirements. | ||||
| CVE-2026-12843 | 2 Stellarwp, Wordpress | 2 Learndash Lms, Wordpress | 2026-09-07 | 5.4 Medium |
| The LearnDash LMS plugin for WordPress is vulnerable to authorization bypass in versions 4.25.0 - 5.1.6. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to enroll arbitrary users in paid courses without payment verification, bypassing the entire payment system and gaining unauthorized access to premium educational content. | ||||
| CVE-2025-9049 | 2 Scriptsbundle, Wordpress | 2 Nokri – Job Board Wordpress Theme, Wordpress | 2026-09-07 | 8.8 High |
| The Nokri – Job Board WordPress Theme theme for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'nokri_account_member_permissions' function in all versions up to, and including, 1.6.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to add new Subscriber users with employer account member permissions, who in turn can escalate privileges by updating the email address of any user, including Administrator users. | ||||