Export limit exceeded: 25720 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25720 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68736 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix handling of disconnected directories Disconnected files or directories can appear when they are visible and opened from a bind mount, but have been renamed or moved from the source of the bind mount in a way that makes them inaccessible from the mount point (i.e. out of scope). Previously, access rights tied to files or directories opened through a disconnected directory were collected by walking the related hierarchy down to the root of the filesystem, without taking into account the mount point because it couldn't be found. This could lead to inconsistent access results, potential access right widening, and hard-to-debug renames, especially since such paths cannot be printed. For a sandboxed task to create a disconnected directory, it needs to have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to the underlying source of the bind mount, and read access to the related mount point. Because a sandboxed task cannot acquire more access rights than those defined by its Landlock domain, this could lead to inconsistent access rights due to missing permissions that should be inherited from the mount point hierarchy, while inheriting permissions from the filesystem hierarchy hidden by this mount point instead. Landlock now handles files and directories opened from disconnected directories by taking into account the filesystem hierarchy when the mount point is not found in the hierarchy walk, and also always taking into account the mount point from which these disconnected directories were opened. This ensures that a rename is not allowed if it would widen access rights [1]. The rationale is that, even if disconnected hierarchies might not be visible or accessible to a sandboxed task, relying on the collected access rights from them improves the guarantee that access rights will not be widened during a rename because of the access right comparison between the source and the destination (see LANDLOCK_ACCESS_FS_REFER). It may look like this would grant more access on disconnected files and directories, but the security policies are always enforced for all the evaluated hierarchies. This new behavior should be less surprising to users and safer from an access control perspective. Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and fix the related comment. Because opened files have their access rights stored in the related file security properties, there is no impact for disconnected or unlinked files. | ||||
| CVE-2025-68379 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix null deref on srq->rq.queue after resize failure A NULL pointer dereference can occur in rxe_srq_chk_attr() when ibv_modify_srq() is invoked twice in succession under certain error conditions. The first call may fail in rxe_queue_resize(), which leads rxe_srq_from_attr() to set srq->rq.queue = NULL. The second call then triggers a crash (null deref) when accessing srq->rq.queue->buf->index_mask. Call Trace: <TASK> rxe_modify_srq+0x170/0x480 [rdma_rxe] ? __pfx_rxe_modify_srq+0x10/0x10 [rdma_rxe] ? uverbs_try_lock_object+0x4f/0xa0 [ib_uverbs] ? rdma_lookup_get_uobject+0x1f0/0x380 [ib_uverbs] ib_uverbs_modify_srq+0x204/0x290 [ib_uverbs] ? __pfx_ib_uverbs_modify_srq+0x10/0x10 [ib_uverbs] ? tryinc_node_nr_active+0xe6/0x150 ? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2c0/0x470 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs] ib_uverbs_run_method+0x55a/0x6e0 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ib_uverbs_cmd_verbs+0x54d/0x800 [ib_uverbs] ? __pfx_ib_uverbs_cmd_verbs+0x10/0x10 [ib_uverbs] ? __pfx___raw_spin_lock_irqsave+0x10/0x10 ? __pfx_do_vfs_ioctl+0x10/0x10 ? ioctl_has_perm.constprop.0.isra.0+0x2c7/0x4c0 ? __pfx_ioctl_has_perm.constprop.0.isra.0+0x10/0x10 ib_uverbs_ioctl+0x13e/0x220 [ib_uverbs] ? __pfx_ib_uverbs_ioctl+0x10/0x10 [ib_uverbs] __x64_sys_ioctl+0x138/0x1c0 do_syscall_64+0x82/0x250 ? fdget_pos+0x58/0x4c0 ? ksys_write+0xf3/0x1c0 ? __pfx_ksys_write+0x10/0x10 ? do_syscall_64+0xc8/0x250 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? fget+0x173/0x230 ? fput+0x2a/0x80 ? ksys_mmap_pgoff+0x224/0x4c0 ? do_syscall_64+0xc8/0x250 ? do_user_addr_fault+0x37b/0xfe0 ? clear_bhb_loop+0x50/0xa0 ? clear_bhb_loop+0x50/0xa0 ? clear_bhb_loop+0x50/0xa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-68360 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. | ||||
| CVE-2025-68347 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events The DSP event handling code in hwdep_read() could write more bytes to the user buffer than requested, when a user provides a buffer smaller than the event header size (8 bytes). Fix by using min_t() to clamp the copy size, This ensures we never copy more than the user requested. | ||||
| CVE-2025-68340 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: team: Move team device type change at the end of team_port_add Attempting to add a port device that is already up will expectedly fail, but not before modifying the team device header_ops. In the case of the syzbot reproducer the gre0 device is already in state UP when it attempts to add it as a port device of team0, this fails but before that header_ops->create of team0 is changed from eth_header to ipgre_header in the call to team_dev_type_check_change. Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense as the private data of the device still holds a struct team. Example sequence of iproute2 commands to reproduce the hang/BUG(): ip link add dev team0 type team ip link add dev gre0 type gre ip link set dev gre0 up ip link set dev gre0 master team0 ip link set dev team0 up ping -I team0 1.1.1.1 Move team_dev_type_check_change down where all other checks have passed as it changes the dev type with no way to restore it in case one of the checks that follow it fail. Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from dev This is done by adding a conditional before the call to dev_set_mtu to prevent it from assigning port_dev->mtu = dev->mtu and instead letting team_dev_type_check_change assign dev->mtu = port_dev->mtu. The conditional is needed because the patch moves the call to team_dev_type_check_change past dev_set_mtu. Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot | ||||
| CVE-2025-68336 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: locking/spinlock/debug: Fix data-race in do_raw_write_lock KCSAN reports: BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1: do_raw_write_lock+0x120/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_fork read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0: do_raw_write_lock+0x88/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_fork value changed: 0xffffffff -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111 Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") has adressed most of these races, but seems to be not consistent/not complete. >From do_raw_write_lock() only debug_write_lock_after() part has been converted to WRITE_ONCE(), but not debug_write_lock_before() part. Do it now. | ||||
| CVE-2025-68321 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: page_pool: always add GFP_NOWARN for ATOMIC allocations Driver authors often forget to add GFP_NOWARN for page allocation from the datapath. This is annoying to users as OOMs are a fact of life, and we pretty much expect network Rx to hit page allocation failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations by default. | ||||
| CVE-2024-0607 | 4 Debian, Fedoraproject, Linux and 1 more | 4 Debian Linux, Fedora, Linux Kernel and 1 more | 2026-10-16 | 6.6 Medium |
| A flaw was found in the Netfilter subsystem in the Linux kernel. The issue is in the nft_byteorder_eval() function, where the code iterates through a loop and writes to the `dst` array. On each iteration, 8 bytes are written, but `dst` is an array of u32, so each element only has space for 4 bytes. That means every iteration overwrites part of the previous element corrupting this array of u32. This flaw allows a local user to cause a denial of service or potentially break NetFilter functionality. | ||||
| CVE-2026-98412 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new() If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put() is called to release the partially initialized unit. However, we've never initialized unit->list and pwrseq_unit_release() will unconditionally call list_del() on it. Initialize unit->list right after allocating the unit struct. | ||||
| CVE-2026-98413 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: always fill AVC decision in avc_has_perm_noaudit() avc_has_perm_noaudit() is documented to return a copy of the access decision in @avd, but its early return for an empty requested permission set leaves the buffer untouched. All callers pass an uninitialized stack variable and afterwards feed it to avc_audit(), and the inode hook even stores it in the per-task decision cache. Fill in a deny-all, audit-all decision, similar to avd_init(), so every caller receives a defined value at no cost on the hot path. | ||||
| CVE-2026-98419 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg. | ||||
| CVE-2026-89603 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-98388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_on_exec() before the exec_update_lock is taken, but after the FD table has been copied if necessary. I have looked through all the calls between the old and new position of the do_close_on_exec() call; there seems to be no file descriptor table access in between. | ||||
| CVE-2026-98415 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node The setup_cpuhp_and_cpuidle() parses the device tree node for the interrupt generation block via of_parse_phandle() and decrements its reference count using of_node_put() immediately after fetching the resource address. However, later the intr_gen_node pointer is passed into of_syscon_register_regmap(). Fix this by declaring intr_gen_node with __free() and removing of_node_put(). | ||||
| CVE-2026-98392 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98393 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip_append_data, rather than to IP_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of IPv4 header). Device MTU allows it (it's only one byte bigger than IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward. The Fixes tag points at the first commit where I could reproduce the overflow with IPv4 and IP_PMTUDISC_PROBE. | ||||
| CVE-2026-98394 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer. Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait in unix_stream_read_generic() if recv() is blocking and the last skb in the queue is MSG_OOB skb. In such a situation, TCP returns 0 immediately regardless of blocking or non-blocking. Let's follow the behaviour. | ||||
| CVE-2026-98398 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in hlock_class() due to an invalid class_idx: WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203 Workqueue: wg-crypt-wg0 wg_packet_tx_worker RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline] RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203 Call Trace: <IRQ> lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886 _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173 tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291 tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325 ... When a lock class is zapped (e.g. during module unload or key unregistration), zap_class() clears the class's bit in lock_classes_in_use and removes it from the class hash table. However, existing lockdep_map instances embedded in data structures may still retain a pointer to the zapped class in their class_cache[] array. When __lock_acquire() subsequently runs on such a lock, it finds lock->class_cache[subclass] != NULL, skipping register_lock_class() and assigning hlock->class_idx to the index of the zapped class. When check_wait_context() or hlock_class() inspects the held_lock, it finds !test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if the zapped slot is subsequently re-allocated to an unrelated lock key, the stale class_cache entry would erroneously match the unrelated class (ABA issue). Add lock_class_cache_is_valid() to validate that the cached class is within lock_classes bounds, still allocated in lock_classes_in_use (using uninstrumented arch_test_bit() in __always_inline context so it is safe in noinstr contexts like match_held_lock()), and that class->key matches the expected subkey (taking lockdep_set_subclass() overrides into account). Also use READ_ONCE()/WRITE_ONCE() when accessing class_cache[]. If the entry is invalid or stale, fall back to register_lock_class() / look_up_lock_class(). | ||||
| CVE-2026-98420 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: follow SMB2 session expiration semantics ksmbd_session_register() destroys valid sessions after ten seconds of inactivity whenever a client starts another SessionSetup exchange. This confuses Session.IdleTime with Session.ExpirationTime. Windows can create additional authenticated sessions on an existing connection, so deleting the older session invalidates its tree connects and makes mapped drives fail with STATUS_NETWORK_NAME_DELETED. The session expiration rules require the server to change a valid session to expired only after its credential expiration time passes. A valid or expired session otherwise keeps its connection from being scavenged. Connections that have not negotiated a dialect, have no sessions, or have only InProgress sessions are disconnected after an implementation-specific timeout. Use the Windows-compatible 45 second value and run the expiration check periodically for both TCP and SMB Direct. Keep zero as an infinite credential expiration time, and count each Valid-to-Expired transition. Set expired sessions to InProgress when they reauthenticate. If authentication fails, remove the session from the global and per-connection tables immediately, including SMB3 multichannel connections. Retain protection against abandoned SessionId-zero exchanges by allowing only one InProgress authentication per connection. Additional exchanges fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are reaped after the same 45 second setup timeout. This bounds the original unauthenticated memory-exhaustion path without evicting established sessions. | ||||
| CVE-2026-98425 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't warn when an IBSS has no channel to scan ieee80211_request_ibss_scan() warns when regulatory leaves no allowed channel, but that can happen as the regdomain can change while IBSS is operating, and it can continue to operate briefly during the 60s grace period until it's shut down. Just remove the warning in this case. | ||||