| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| mpGabinet is vulnerable to Privilege Escalation due to excessive database privileges assigned to the user used by the application. An attacker with access to any running application instance connected to the backend server can extract database credentials from the application’s memory by inspecting the running process. While ability to retrieve credentials from memory is expected behavior, the exposed credentials grant administrative access to the database, exceeding the privileges required for normal application functionality. This allows an attacker to perform actions beyond those permitted through the application interface.
This issue affects mpGabinet version 23.12.19 and below. |
| Dell Alienware Command Center (AWCC), versions prior to 6.13.8.0, contain an Execution with Unnecessary Privileges vulnerability in the AWCC. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| In udev in systemd before 260, local root execution can occur via malicious hardware devices and unsanitized kernel output. |
| Local privilege escalation in Genetec Sipelia Plugin. An authenticated low-privileged Windows user could exploit this vulnerability to gain elevated privileges on the affected system. |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. |
| Vulnerability in Oracle Java SE (component: Libraries). The supported version that is affected is Oracle Java SE: 25.0.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Lifecycle Management). The supported version that is affected is 11.2.24.0.000. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized read access to a subset of Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 5.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:R/S:U/C:L/I:H/A:N). |
| Execution with Unnecessary Privileges vulnerability in multiple services of Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric MobileHMI versions 10.97.3 and prior, Mitsubishi Electric Hyper Historian versions 10.97.3 and prior, Mitsubishi Electric AnalytiX versions 10.97.3 and prior, Mitsubishi Electric IoTWorX version 10.95, Mitsubishi Electric GENESIS32 all versions, Mitsubishi Electric BizViz all versions, Mitsubishi Electric MC Works64 all versions, Mitsubishi Electric GENESIS versions 11.00, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions MobileHMI versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions Hyper Historian versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions AnalytiX versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions IoTWorX version 10.95, Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions, Mitsubishi Electric Iconics Digital Solutions BizViz all versions, and Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.00 allows a local authenticated attacker to make an unauthorized write to arbitrary files, by creating a symbolic link from a file used as a write destination by the services of the affected products to a target file. This could allow the attacker to destroy the file on a PC with the affected products installed, resulting in a denial-of-service (DoS) condition on the PC if the destroyed file is necessary for the operation of the PC. |
| An issue was discovered in Percona PMM before 3.7. Because an internal database user retains specific superuser privileges, an attacker with pmm-admin rights can abuse the "Add data source" feature to break out of the database context and execute shell commands on the underlying operating system. |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are 7.1.14 and 7.2.4. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Frigate is a network video recorder (NVR) with realtime local object detection for IP cameras. Prior to 0.16.4, a critical Remote Command Execution (RCE) vulnerability has been identified in the Frigate integration with go2rtc. The application does not sanitize user input in the video stream configuration (config.yaml), allowing direct injection of system commands via the exec: directive. The go2rtc service executes these commands without restrictions. This vulnerability is only exploitable by an administrator or users who have exposed their Frigate install to the open internet with no authentication which allows anyone full administrative control. This vulnerability is fixed in 0.16.4. |
| A vulnerability in the CLI of Cisco Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device.
This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for a specific CLI command. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| Dask distributed is a distributed task scheduler for Dask. Prior to 2026.1.0, when Jupyter Lab, jupyter-server-proxy, and Dask distributed are all run together, it is possible to craft a URL which will result in code being executed by Jupyter due to a cross-side-scripting (XSS) bug in the Dask dashboard. It is possible for attackers to craft a phishing URL that assumes Jupyter Lab and Dask may be running on localhost and using default ports. If a user clicks on the malicious link it will open an error page in the Dask Dashboard via the Jupyter Lab proxy which will cause code to be executed by the default Jupyter Python kernel. This vulnerability is fixed in 2026.1.0. |
| Skipper is an HTTP router and reverse proxy for service composition. The default skipper configuration before 0.23.0 was -lua-sources=inline,file. The problem starts if untrusted users can create lua filters, because of -lua-sources=inline , for example through a Kubernetes Ingress resource. The configuration inline allows these user to create a script that is able to read the filesystem accessible to the skipper process and if the user has access to read the logs, they an read skipper secrets. This vulnerability is fixed in 0.23.0. |
| Improper access control in the WCF endpoint in Edgemo (now owned by Danoffice IT) Local Admin Service 1.2.7.23180 on Windows allows a local user to escalate their privileges to local administrator via direct communication with the LocalAdminService.exe named pipe, bypassing client-side group membership restrictions. |
| A vulnerability exists in F5 BIG-IP Container Ingress Services that may allow excessive permissions to read cluster secrets. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| MacroHub developed by GIGABYTE has a Local Privilege Escalation vulnerability. Due to the MacroHub application launching external applications with improper privileges, allowing authenticated local attackers to execute arbitrary code with SYSTEM privileges. |
| captive browser, a dedicated Chrome instance to log into captive portals without messing with DNS settings. In 25.05 and earlier, when programs.captive-browser is enabled, any user of the system can run arbitrary commands with the CAP_NET_RAW capability (binding to privileged ports, spoofing localhost traffic from privileged services...). This vulnerability is fixed in 25.11 and 26.05. |
| OpenClaw is a personal AI assistant. Prior to version 2026.2.15, a configuration injection issue in the Docker tool sandbox could allow dangerous Docker options (bind mounts, host networking, unconfined profiles) to be applied, enabling container escape or host data access. OpenClaw 2026.2.15 blocks dangerous sandbox Docker settings and includes runtime enforcement when building `docker create` args; config-schema validation for `network=host`, `seccompProfile=unconfined`, `apparmorProfile=unconfined`; and security audit findings to surface dangerous sandbox docker config. As a workaround, do not configure `agents.*.sandbox.docker.binds` to mount system directories or Docker socket paths, keep `agents.*.sandbox.docker.network` at `none` (default) or `bridge`, and do not use `unconfined` for seccomp/AppArmor profiles. |
| A vulnerability in the NX-OS CLI privilege levels of Cisco UCS Manager Software could allow an authenticated, local attacker with read-only privileges to modify files and perform unauthorized actions on an affected system.
This vulnerability exists because unnecessary privileges are given to the user. An attacker could exploit this vulnerability by authenticating to a device as a read-only user and connecting to the NX-OS CLI. A successful exploit could allow the attacker to create or overwrite files in the file system or perform limited privileged actions on an affected device. |
