| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix slot write race condition
Parallel concurrent writes to the same zram index result in leaked
zsmalloc handles. Schematically we can have something like this:
CPU0 CPU1
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
compress compress
handle = zs_malloc() handle = zs_malloc()
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done
too early. In fact, we need to reset zram entry right before we set its
new handle, all under the same slot lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
cnic: Fix use-after-free bugs in cnic_delete_task
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
um: virtio_uml: Fix use-after-free after put_device in probe
When register_virtio_device() fails in virtio_uml_probe(),
the code sets vu_dev->registered = 1 even though
the device was not successfully registered.
This can lead to use-after-free or other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use. |
| Redis is an open source, in-memory database that persists on disk. Versions 8.2.1 and below allow an authenticated user to use a specially crafted Lua script to manipulate different LUA objects and potentially run their own code in the context of another user. The problem exists in all versions of Redis with LUA scripting. This issue is fixed in version 8.2.2. A workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing LUA scripts. This can be done using ACL to block a script by restricting both the EVAL and FUNCTION command families. |
| In the Linux kernel, the following vulnerability has been resolved:
qed: Don't collect too many protection override GRC elements
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc02662ed [qed]
qed_dbg_protection_override_dump at ffffffffc0267792 [qed]
qed_dbg_feature at ffffffffc026aa8f [qed]
qed_dbg_all_data at ffffffffc026b211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc027298a [qed]
devlink_health_do_dump at ffffffff82497f61
devlink_health_report at ffffffff8249cf29
qed_report_fatal_error at ffffffffc0272baf [qed]
qede_sp_task at ffffffffc045ed32 [qede]
process_one_work at ffffffff81d19783
or the qedf storage driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc068b2ed [qed]
qed_dbg_protection_override_dump at ffffffffc068c792 [qed]
qed_dbg_feature at ffffffffc068fa8f [qed]
qed_dbg_all_data at ffffffffc0690211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc069798a [qed]
devlink_health_do_dump at ffffffff8aa95e51
devlink_health_report at ffffffff8aa9ae19
qed_report_fatal_error at ffffffffc0697baf [qed]
qed_hw_err_notify at ffffffffc06d32d7 [qed]
qed_spq_post at ffffffffc06b1011 [qed]
qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed]
qedf_cleanup_fcport at ffffffffc05e7597 [qedf]
qedf_rport_event_handler at ffffffffc05e7bf7 [qedf]
fc_rport_work at ffffffffc02da715 [libfc]
process_one_work at ffffffff8a319663
Resolve this by clamping the firmware's return value to the maximum
number of legal elements the firmware should return. |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later
QuTS hero h5.2.6.3195 build 20250715 and later |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: split cgroup_destroy_wq into 3 workqueues
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
Call Trace:
cgroup_lock_and_drain_offline+0x14c/0x1e8
cgroup_destroy_root+0x3c/0x2c0
css_free_rwork_fn+0x248/0x338
process_one_work+0x16c/0x3b8
worker_thread+0x22c/0x3b0
kthread+0xec/0x100
ret_from_fork+0x10/0x20
Root Cause:
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later |
| A use of externally-controlled format string vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data or modify memory.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later
QuTS hero h5.2.6.3195 build 20250715 and later |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later
QuTS hero h5.2.6.3195 build 20250715 and later |
| A use of externally-controlled format string vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data or modify memory.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later
QuTS hero h5.2.6.3195 build 20250715 and later |
| A TCL Smart TV running a vulnerable UPnP/DLNA MediaRenderer implementation is affected by a remote, unauthenticated Denial of Service (DoS) condition. By sending a flood of malformed or oversized SetAVTransportURI SOAP requests to the UPnP control endpoint, an attacker can cause the device to become unresponsive. This denial persists as long as the attack continues and affects all forms of TV operation. Manual user control and even reboots do not restore functionality unless the flood stops. |
| Unity Runtime before 2025-10-02 on Android, Windows, macOS, and Linux allows argument injection that can result in loading of library code from an unintended location. If an application was built with a version of Unity Editor that had the vulnerable Unity Runtime code, then an adversary may be able to execute code on, and exfiltrate confidential information from, the machine on which that application is running. NOTE: product status is provided for Unity Editor because that is the information available from the Supplier. However, updating Unity Editor typically does not address the effects of the vulnerability; instead, it is necessary to rebuild and redeploy all affected applications. |
| phpMyFAQ is an open source FAQ web application. Versions 4.0-nightly-2025-10-03 and below do not enforce uniqueness of email addresses during user registration. This allows multiple distinct accounts to be created with the same email. Because email is often used as an identifier for password resets, notifications, and administrative actions, this flaw can cause account ambiguity and, in certain configurations, may lead to privilege escalation or account takeover. This issue is fixed in version 4.0.13. |
| An information disclosure vulnerability has been discovered in SeaCMS 13.1. The vulnerability exists in the admin_safe.php component located in the /btcoan/ directory. This security flaw allows authenticated administrators to scan and download not only the application’s source code but also potentially any file accessible on the server’s root directory. |
| A vulnerability in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.4, 2024.Q4.0 through 2024.Q4.5, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.1 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10, and 7.4 GA through update 92 allows sensitive user data to be included in the Freemarker template. This weakness permits an unauthorized actor to gain access to, and potentially render, confidential information that should remain restricted. |
| The Schema Plugin For Divi, Gutenberg & Shortcodes plugin for WordPress is vulnerable to Object Instantiation in all versions up to, and including, 4.3.2 via deserialization of untrusted input via the wpt_schema_breadcrumbs shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| The Epic Bootstrap Buttons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘icol’ parameter in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Unify plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin for WordPress's unify_checkout shortcode in all versions up to, and including, 3.4.7 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
