| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| gpac 2.3-DEV-rev921-g422b78ecf-master was discovered to contain a out of boundary write vulnerability via swf_get_string at scene_manager/swf_parse.c:325 |
| An issue in Ecommerce-CodeIgniter-Bootstrap commit v. d22b54e8915f167a135046ceb857caaf8479c4da allows a remote attacker to execute arbitrary code via the removeSecondaryImage method of the Publish.php component. |
| Unitree Go2, G1, H1, and B2 devices through 2025-09-20 allow root OS command injection via the hostapd_restart.sh wifi_ssid or wifi_pass parameter (within restart_wifi_ap and restart_wifi_sta). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix the out of bound issue of vmemmap address
In sparse vmemmap model, the virtual address of vmemmap is calculated as:
((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT)).
And the struct page's va can be calculated with an offset:
(vmemmap + (pfn)).
However, when initializing struct pages, kernel actually starts from the
first page from the same section that phys_ram_base belongs to. If the
first page's physical address is not (phys_ram_base >> PAGE_SHIFT), then
we get an va below VMEMMAP_START when calculating va for it's struct page.
For example, if phys_ram_base starts from 0x82000000 with pfn 0x82000, the
first page in the same section is actually pfn 0x80000. During
init_unavailable_range(), we will initialize struct page for pfn 0x80000
with virtual address ((struct page *)VMEMMAP_START - 0x2000), which is
below VMEMMAP_START as well as PCI_IO_END.
This commit fixes this bug by introducing a new variable
'vmemmap_start_pfn' which is aligned with memory section size and using
it to calculate vmemmap address instead of phys_ram_base. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
When dm_bm_read_lock() fails due to locking or checksum errors, it
releases the faulty block implicitly while leaving an invalid output
pointer behind. The caller of dm_bm_read_lock() should not operate on
this invalid dm_block pointer, or it will lead to undefined result.
For example, the dm_array_cursor incorrectly caches the invalid pointer
on reading a faulty array block, causing a double release in
dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put().
Reproduce steps:
1. initialize a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. wipe the second array block offline
dmsteup remove cache cmeta cdata corig
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try reopen the cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
device-mapper: array: array_block_check failed: blocknr 0 != wanted 10
device-mapper: block manager: array validator check failed for block 10
device-mapper: array: get_ablock failed
device-mapper: cache metadata: dm_array_cursor_next for mapping failed
------------[ cut here ]------------
kernel BUG at drivers/md/dm-bufio.c:638!
Fix by setting the cached block pointer to NULL on errors.
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/damaged" test in dm-unit:
dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix enomem handling in buffered reads
If netfs_read_to_pagecache() gets an error from either ->prepare_read() or
from netfs_prepare_read_iterator(), it needs to decrement ->nr_outstanding,
cancel the subrequest and break out of the issuing loop. Currently, it
only does this for two of the cases, but there are two more that aren't
handled.
Fix this by moving the handling to a common place and jumping to it from
all four places. This is in preference to inserting a wrapper around
netfs_prepare_read_iterator() as proposed by Dmitry Antipov[1]. |
| Access control vulnerability in the identity authentication module
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix AUX buffer serialization
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
media: aspeed: Fix memory overwrite if timing is 1600x900
When capturing 1600x900, system could crash when system memory usage is
tight.
The way to reproduce this issue:
1. Use 1600x900 to display on host
2. Mount ISO through 'Virtual media' on OpenBMC's web
3. Run script as below on host to do sha continuously
#!/bin/bash
while [ [1] ];
do
find /media -type f -printf '"%h/%f"\n' | xargs sha256sum
done
4. Open KVM on OpenBMC's web
The size of macro block captured is 8x8. Therefore, we should make sure
the height of src-buf is 8 aligned to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: change DMA direction while mapping reinjected packets
For fragmented packets, ath12k reassembles each fragment as a normal
packet and then reinjects it into HW ring. In this case, the DMA
direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE. Otherwise,
an invalid payload may be reinjected into the HW and
subsequently delivered to the host.
Given that arbitrary memory can be allocated to the skb buffer,
knowledge about the data contained in the reinjected buffer is lacking.
Consequently, there’s a risk of private information being leaked.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix input error path memory access
When there is a misconfiguration of input state slow path
KASAN report error. Fix this error.
west login:
[ 52.987278] eth1: renamed from veth11
[ 53.078814] eth1: renamed from veth21
[ 53.181355] eth1: renamed from veth31
[ 54.921702] ==================================================================
[ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295
[ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512
[ 54.924169]
[ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25
[ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 54.926401] Call Trace:
[ 54.926731] <IRQ>
[ 54.927009] dump_stack_lvl+0x2a/0x3b
[ 54.927478] kasan_report+0x84/0xa6
[ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295
[ 54.928410] xfrmi_rcv_cb+0x2d/0x295
[ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e
[ 54.929354] xfrm4_rcv_cb+0x46/0x5e
[ 54.929804] xfrm_rcv_cb+0x7e/0xa1
[ 54.930240] xfrm_input+0x1b3a/0x1b96
[ 54.930715] ? xfrm_offload+0x41/0x41
[ 54.931182] ? raw_rcv+0x292/0x292
[ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2
[ 54.932158] ? skb_sec_path+0xd/0x3f
[ 54.932610] ? xfrmi_input+0x90/0xce
[ 54.933066] xfrm4_esp_rcv+0x33/0x54
[ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2
[ 54.934089] ip_local_deliver_finish+0x110/0x120
[ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2
[ 54.935248] NF_HOOK.constprop.0+0xf8/0x138
[ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68
[ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168
[ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2
[ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d
[ 54.938135] NF_HOOK.constprop.0+0xf8/0x138
[ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68
[ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d
[ 54.939904] ? ip_local_deliver_finish+0x120/0x120
[ 54.940497] __netif_receive_skb_one_core+0xc9/0x107
[ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2
[ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9
[ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38
[ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b
[ 54.943618] process_backlog+0xb3/0x187
[ 54.944102] __napi_poll.constprop.0+0x57/0x1a7
[ 54.944669] net_rx_action+0x1cb/0x380
[ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7
[ 54.945744] ? vring_new_virtqueue+0x17a/0x17a
[ 54.946300] ? note_interrupt+0x2cd/0x367
[ 54.946805] handle_softirqs+0x13c/0x2c9
[ 54.947300] do_softirq+0x5f/0x7d
[ 54.947727] </IRQ>
[ 54.948014] <TASK>
[ 54.948300] __local_bh_enable_ip+0x48/0x62
[ 54.948832] __neigh_event_send+0x3fd/0x4ca
[ 54.949361] neigh_resolve_output+0x1e/0x210
[ 54.949896] ip_finish_output2+0x4bf/0x4f0
[ 54.950410] ? __ip_finish_output+0x171/0x1b8
[ 54.950956] ip_send_skb+0x25/0x57
[ 54.951390] raw_sendmsg+0xf95/0x10c0
[ 54.951850] ? check_new_pages+0x45/0x71
[ 54.952343] ? raw_hash_sk+0x21b/0x21b
[ 54.952815] ? kernel_init_pages+0x42/0x51
[ 54.953337] ? prep_new_page+0x44/0x51
[ 54.953811] ? get_page_from_freelist+0x72b/0x915
[ 54.954390] ? signal_pending_state+0x77/0x77
[ 54.954936] ? preempt_count_sub+0x14/0xb3
[ 54.955450] ? __might_resched+0x8a/0x240
[ 54.955951] ? __might_sleep+0x25/0xa0
[ 54.956424] ? first_zones_zonelist+0x2c/0x43
[ 54.956977] ? __rcu_read_lock+0x2d/0x3a
[ 54.957476] ? __pte_offset_map+0x32/0xa4
[ 54.957980] ? __might_resched+0x8a/0x240
[ 54.958483] ? __might_sleep+0x25/0xa0
[ 54.958963] ? inet_send_prepare+0x54/0x54
[ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c
[ 54.960000] sock_sendmsg_nosec+0x42/0x6c
[ 54.960502] __sys_sendto+0x15d/0x1cc
[ 54.960966] ? __x64_sys_getpeername+0x44/0x44
[ 54.961522] ? __handle_mm_fault+0x679/0xae4
[ 54.962068] ? find_vma+0x6b/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: ivtv: Add check for DMA map result
In case DMA fails, 'dma->SG_length' is 0. This value is later used to
access 'dma->SGarray[dma->SG_length - 1]', which will cause out of
bounds access.
Add check to return early on invalid value. Adjust warnings accordingly.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: add check for invalid name in btf_name_valid_section()
If the length of the name string is 1 and the value of name[0] is NULL
byte, an OOB vulnerability occurs in btf_name_valid_section() and the
return value is true, so the invalid name passes the check.
To solve this, you need to check if the first position is NULL byte and
if the first character is printable. |
| web3-core-method is a package designed to creates the methods on the web3 modules. A Prototype Pollution vulnerability in the attachToObject function of web3-core-method version 1.10.4 and before allows attackers to inject properties on Object.prototype via supplying a crafted payload, causing denial of service (DoS) as the minimum consequence. |
| spmrc is a package that provides the rc manager for spm. A Prototype Pollution vulnerability in the set and config function of spmrc version 1.2.0 and before allows attackers to inject properties on Object.prototype via supplying a crafted payload, causing denial of service (DoS) as the minimum consequence. |
| A Prototype Pollution vulnerability in the byGroupAndType function of sassdoc-extras v2.5.1 and before allows attackers to inject properties on Object.prototype via supplying a crafted payload, causing denial of service (DoS) as the minimum consequence. |
| rollbar is a package designed to effortlessly track and debug errors in JavaScript applications. This package includes advanced error tracking features and an intuitive interface to help you identify and fix issues more quickly. A Prototype Pollution vulnerability in the utility.set function of rollbar v2.26.4 and before allows attackers to inject properties on Object.prototype via supplying a crafted payload, causing denial of service (DoS) as the minimum consequence. |
| A flaw has been found in JackieDYH Resume-management-system up to fb6b857d852dd796e748ce30c606fe5e61c18273. Affected by this issue is some unknown functionality of the file /admin/show.php. This manipulation of the argument userid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in MuFen-mker PHP-Usermm up to 37f2d24e51b04346dfc565b93fc2fc6b37bdaea9. This affects an unknown part of the file /chkuser.php. Performing manipulation of the argument Username results in sql injection. The attack may be initiated remotely. The exploit is now public and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
