Export limit exceeded: 398637 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 42562 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (42562 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||
| CVE-2026-72150 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data. | ||||
| CVE-2026-72154 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: Fix jump_label smp syncing The original commit 8c30b0018f9d ("openrisc: Add jump label support") copies from arm64 and does not properly consider how icache invalidation on remote cores works in OpenRISC. On OpenRISC remote icaches need to be invalidated otherwise static key's may remain state after updating. Fix SMP cache syncing by: 1. Properly invalidate remote core icaches on SMP systems by using icache_all_inv. The old code uses kick_all_cpus_sync() which runs a no-op IPI function call on remote CPU's which does execute a lot of code and flushes many cache lines in the process, but does not flush all and it's not correct on OpenRISC. 2. For architectures that do not have WRITETHROUGH caches be sure to flush the dcache after patching. To test this I first reproduced the issue using a custom test module [0]. The test confirmed that some icache lines maintained stale static_key code sequences after calling static_branch_enable(). After this patch there are no longer jump_label coherency issues. [0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test | ||||
| CVE-2026-72158 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary. | ||||
| CVE-2026-72176 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the stats directory setup is completed. When the tried_regions directory setup is failed, the setup function ensures the reference for the tried regions directory is released. Hence the error path should put references on setup succeeded directory objects, starting from the stats directory. However, the error path is putting the tried_regions directory instead of the stats directory. As a direct result, the stats directory object is leaked. Worse yet, if the tried_regions directory setup failed from the initial allocation, the scheme->tried_regions field remains uninitialized. The following kobject_put(&scheme->tried_regions->kobj) call in the error path will dereference the uninitialized memory. The setup failures should not be common. But once it happens, the consequence is quite bad. Fix this issue by correctly putting the stats directory instead of the tried_regions directory. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-72177 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs() Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in error paths". Error paths of damon_sysfs_access_pattern_add_dirs() and damon_sysfs_scheme_add_dirs() functions put references to directories in wrong orders. As a result, uninitialized memory dereference and/or memory leak can happen. Fix those. This patch (of 2): In access_pattern_add_dirs(), error handling path puts references starting from setup failed directories. If the failure happpened from the initial allication in the setup functions, uninitialized memory dereference happen. The allocation failures will not commonly happen, but the consequence is quite bad. Fix the wrong reference put orders. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-72193 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: cap RESTART_TABLE free-chain walker at rt->used A crafted NTFS3 disk image triggers an in-kernel infinite loop at mount time, hanging the mounting thread and firing the soft-lockup watchdog within ~22s on multi-CPU hosts (panic with kernel.softlockup_panic=1). The bug is reachable from desktop USB auto-mount on distributions where udisks2 routes the NTFS signature to the in-tree ntfs3 driver (Arch family and an increasing fraction of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual mount elsewhere. check_rstbl()'s second walker iterates the free-entry singly-linked list headed by rt->first_free with no upper bound on iteration count: for (off = ff; off;) { if (off == RESTART_ENTRY_ALLOCATED) return false; off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off)); if (off > ts - sizeof(__le32)) return false; } The existing guards cover three exits: end-of-list (off == 0), the in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds (off > ts - sizeof(__le32)). None of the three prevents an in-bounds cycle. A crafted on-disk RESTART_TABLE whose free chain contains a self-loop or A->B->A cycle whose offsets satisfy: - in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)] - (off - sizeof(struct RESTART_TABLE)) % rsize == 0 passes all existing guards and spins the mount-time thread forever. Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18 stores 0x18 as its next pointer; mount of the forged image with the in-tree ntfs3 driver never returns. Bound the walker by rt->used. Each entry on a legitimate free chain is unique, and the total slot count is ne = le16_to_cpu (rt->used). A traversal that visits more than ne slots is by construction malformed; reject it as a corrupt RESTART_TABLE. After this patch, mount of the forged image returns with -EINVAL and a log_replay failure message, and mkntfs-produced legitimate images mount cleanly (verified in the same UML harness). | ||||
| CVE-2026-72194 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add depth limit to indx_find_buffer to prevent stack overflow indx_find_buffer() recursively descends the B+ tree index with no depth limit. A crafted NTFS image with circular index node references causes unbounded recursion, overflowing the kernel stack and panicking the system. This is reachable by mounting a malicious NTFS filesystem (e.g. from a USB drive via desktop automount) and deleting a file whose index entry triggers the rebalancing fallback path in indx_delete_entry(). Add a depth parameter and bail out with -EINVAL when it reaches the fnd->nodes array bound, matching the constraint already enforced by fnd_push() in indx_find(). The related function indx_find() was previously patched for a similar infinite-loop issue (commit 1732053c8a6b), but indx_find_buffer() was missed. | ||||
| CVE-2026-72212 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path. | ||||
| CVE-2026-72233 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: reacquire gw address after skb realloc The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-72251 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: reload possible stale data pointer quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream. | ||||
| CVE-2026-72234 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: access unicast_ttvn skb->data only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the ethernet header but missed for the unicast_packet pointer. | ||||
| CVE-2026-72235 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: retrieve ethhdr after potential skb realloc on RX pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the VLAN header but missed for the ethernet header which is later used for the TT and AP isolation handling. | ||||
| CVE-2026-72256 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_cluster: reject template conntracks in hash match xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully initialized conntrack and passes it to xt_cluster_hash(). This causes a state confusion bug when the raw table CT target attaches a template conntrack to skb->_nfct before normal conntrack processing. Templates carry IPS_TEMPLATE status but do not have a valid tuple for hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the zeroed l3num field. Reject template conntracks before hashing them. This matches existing netfilter handling for template objects and avoids hashing incomplete conntrack state. | ||||
| CVE-2026-72328 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential amdxdna_umap lifetime race amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove() before removing the object from abo->mem.umap_list. If aie2_populate_range() runs concurrently, it may obtain a reference to an amdxdna_umap that is being released, leading to a potential use-after-free. Use kref_get_unless_zero() in aie2_populate_range() when acquiring a reference. If the reference count has already dropped to zero, release is in progress and the entry is skipped. | ||||
| CVE-2026-72295 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate irqchip index in irqfd routing Sashiko reported that the irqchip index is not validated for LoongArch. Add validation and reject out-of-range irqchip indexes to avoid indexing past the routing table's chip array. | ||||
| CVE-2026-72283 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a dangling pointer will result in a use-after-free if the irqfd is reachable through KVM's routing, but the producer is freed separately. E.g. for VFIO PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when the vector is disabled, which can happen independent of routing updates. [sean: drop PPC change, massage changelog] | ||||
| CVE-2026-72304 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put In sof_ipc4_bytes_put(), the copy size is derived from the old data->size in the buffer rather than the incoming new data's size field from ucontrol. If the new data has a different size, the copy uses the wrong length: it may truncate valid data or copy stale bytes. Fix by validating and using the incoming data's sof_abi_hdr.size from ucontrol before copying. | ||||
| CVE-2026-72317 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | ||||
| CVE-2026-72329 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | ||||